T O P I C R E V I E W
|
Bottle Fed
Member # 2686
|
posted
Installed new doors a year ago on my fox Convt and went back to wire it up this week, can't seem to get power to it. I plugged the main harness back in and wired up the speakers, checked the fuse, what am I missing.....????
Thanks Paul
|
KevinK
Member # 9234
|
posted
What's not working? Locks? Window? Mirror? Speakers?
|
Bottle Fed
Member # 2686
|
posted
Everything, obviously it's not getting power on both sides but I thought plugging it back in was all I had to do...guess I missed something but reaching out to c what other clues I can come up with
|
KevinK
Member # 9234
|
posted
Ok, let's start with the power locks. Both left and right power door locks get 12 volts from the circuit breaker by the black wire with a whit stripe. There should be power at all times.
|
Bottle Fed
Member # 2686
|
posted
Thanks Kevin I'll start with that
|
KevinK
Member # 9234
|
posted
Actually, power locks, power windows and seat Lumbar all come from the same circuit breaker. The circuit breaker is fed from the battery side of the starter relay.
|
Bottle Fed
Member # 2686
|
posted
maybe that's where I messed up....redid a lot of the wiring on the firewall, hopefully it's there
|
Bottle Fed
Member # 2686
|
posted
KevinK, tried swapping the circuit breaker with another one I had, still nothing...checked voltage at the solenoid and it's getting power and checked the circuit breaker and it's getting power too...the fuses looked ok, what else is there???
|