T O P I C R E V I E W
|
Ronnie707
Member # 8621
|
posted
Just lowered a 2014 mustang on BC coilovers and I believe my pinion angle is now off causing my pinion seal to leak. I am looking to buy an adjustable UCA however I see them sold in pairs and some sold single. From the videos I have seen looks like I will only need one UCA to adjust my pinion angle? Thanks for any help guys.
|
Fostang
Member # 3752
|
posted
At the minimum the upper but I usually prefer to upgrade all of it.
Here's an article covering the matter
http://www.americanmuscle.com/upgrading-your-2005-2014-mustang-rear-control-arms.html
Btw if the seal is leaking. It's toast and should be replaced also. [ 2016-03-24, 06:35 PM: Message edited by: Fostang ]
|
CoyoteMike
Member # 13748
|
posted
There is only a single Upper Control Arm on the Coyote mustangs.
You will want to get the UCA and Bracket:
Bracket: http://www.americanmuscle.com/bmr-uca-mount-1114.html
UCA http://www.americanmuscle.com/bmr-adj-uca-poly-1114.html
Dont skip on the bracket or you will get clunks and pops in the rear end.
Install and adjust -2 degrees on the pinion and call it a day.
|