T O P I C R E V I E W
|
83vert
Member # 14237
|
posted
Gt40p headers from summit One of the tubes on the left side header barley touches motor mount. Is this something to worry about if so what the best route to take to solve this
|
92_5.0
Member # 7624
|
posted
I wouldn't lose sleep over it. Is it touching the rubber part or tapping the metal?
|
83vert
Member # 14237
|
posted
It's flush with metal hump part
|
Boss 327
Member # 9143
|
posted
Dent it a little for clearance if you need to.
|
LXjames
Member # 10791
|
posted
Just FYI denting a header does absolutely nothing to performance. Tested and proven so don't lose sleep over a little clearancing. You'd be amazed at the abuse you can put to a header and still be efficient
|
RRRCobraSC281
Member # 7086
|
posted
get the area cherry red and hit it with a hammer
|
Blue92
Member # 8789
|
posted
https://www.youtube.com/watch?v=azPKIjxmmdU
|
92_5.0
Member # 7624
|
posted
quote: Originally posted by LXjames: Just FYI denting a header does absolutely nothing to performance. Tested and proven so don't lose sleep over a little clearancing. You'd be amazed at the abuse you can put to a header and still be efficient
I saw that video too, pretty amazing.
|
83vert
Member # 14237
|
posted
Thanks for the input you guys. Very helpful
|
Marks93
Member # 11130
|
posted
quote: Originally posted by Blue92: https://www.youtube.com/watch?v=azPKIjxmmdU
Damn! I'd be scared to bash a header while it's hooked up to a $1500+ set of aluminum heads. I'm just not that rich! Wouldn't that potentially damage the head...or the bolts....or the bolt holes....or the valve train?? From the video...guess not!
|
83vert
Member # 14237
|
posted
Mission successfull.
|