T O P I C R E V I E W
|
Built4Speed
Member # 13873
|
posted
I am swapping a complete 2003 gt motor into my 98 gt. I have both cars. Will the computer need to be swapped? Will the cluster work since it is not digital in the 98? [ 2015-06-09, 02:46 PM: Message edited by: Built4Speed ]
|
Wht86drop
Member # 12104
|
posted
If i were you id swap the whole harness and gauge with computer. No headache after that. And when i say whole harness i mean eeeeverything
|
Blind
Member # 3052
|
posted
sensors should all work fine, the dash (speedo?) analog gauge gets it's signal from the trans, not the engine. I think the 98 used a digital speedo vss though, my `97 did...I had to use a dallas speedcal to correct my speedo after the 4.30 gear change.
|
70stang351w
Member # 9948
|
posted
thought you only had to get the adapter for COPS and plug and play?
|
Wht86drop
Member # 12104
|
posted
If he has both cars it would be cheaper to swap it all so he doesnt spend money on something he doesnt need
|
SacStangDriver
Member # 8304
|
posted
just use the 98 gt harness and spark plug wires and put the 03 motor in. only thing you'll have to swap is the timing cover for the mounts. done this swap many times.
|
SIC9250
Member # 8216
|
posted
quote: Originally posted by SacStangDriver: just use the 98 gt harness and spark plug wires and put the 03 motor in. only thing you'll have to swap is the timing cover for the mounts. done this swap many times.
^This.Dont make shit more complicated then what some of these replies are lol
|