T O P I C R E V I E W
|
93 5.0
Member # 12418
|
posted
I am working on a 93 Ford Mustang 5.0 and I get real bad wheel hop when launching I have urP double adjustable uppers and lowers and still got will hop stock springs brand new rear shocks no quads and I can't figure out why I got any ideas
|
Blow_U_In_Reverse
Member # 12298
|
posted
what kind of shocks do you have?
|
5.0 LsX
Member # 10017
|
posted
I bet you have stock axle housing bushings? and urethane on all of the other bushings? need to change them out
|
Wht86drop
Member # 12104
|
posted
Possible rear end going out? I've had two cars with that issue in the past.
|
Blind
Member # 3052
|
posted
A big problem with adjustable uppers is they could be adjusted in a way that has the pinion angle totally out of whack.
|
93 5.0
Member # 12418
|
posted
stock bushings the rear ends out of it 86 super coupe with 373 posi 17 by 10 in the rear 275 40 17 tires and I don't member what shocks I have
|
5.0 LsX
Member # 10017
|
posted
my $ is on the bushings...see it all the time. put the stock uppers back in and I bet it goes away
|
93 5.0
Member # 12418
|
posted
I had the stock uppers on and it was worse
|
5.0 LsX
Member # 10017
|
posted
has to be shot bushings or rear end is messed up..
|
racsirx
Member # 1710
|
posted
What did you set the pinion angle at? With adjustable rear control arms and the pinion set right you shouldn't have any wheel hop problems.
|
93 5.0
Member # 12418
|
posted
I'm taking the car in Sunday to the shop to get it set and I seen it stick a lil more out on the right side then the left I guess I didn't set it right it's my first time with adjustable upper and lower control arms
|
FivePTSlow
Member # 7682
|
posted
I'm with 5.0lsx the upper axle housing bushing need to be replaced.
|
90 7up lx
Member # 10304
|
posted
Also try ghrowing the quads on their...see if it helps out
|
93 5.0
Member # 12418
|
posted
I put the quads on and it sits so hight and rest on the quand the holes where the quads bolt up to the rearend push it hight where I can fit a beer can between the tire and the bak finder
|
5.0 LsX
Member # 10017
|
posted
your uppers are not adjusted correctly
|
dean-93
Member # 9401
|
posted
NEW gabriel quad shocks fixed my wheel hop on my fox with non adjustable poly control arms and my buddies 99gt all stock
the wheel hop was so violent before my glove box flew open
the new quads are like 25$ each at autozone or amazon
|
NEIGHT
Member # 8741
|
posted
Damn that's weird I've never experienced wheel hop, even when I had the stock upper N lowers with no quad shocks.
|
5.0 LsX
Member # 10017
|
posted
assuming everything else on the vehicle is in good condition (check your trq boxes), you will only get wheel hop with bad bushings or different bushings (poly and rubber) adding quad shocks is just trying to mask the problem. undo your right upper control arm and set your pinion angle/ center the rear with the left upper. put the right upper on to where to bolt slides in easily and give it half a turn to tighten. (all at ride height) adjust only the right upper to set the preload after testing to make sure it burns out in a straight line and doesn't kick out left or right.
|
93 5.0
Member # 12418
|
posted
Do they make a smaller quad shock then stock cuz the stock ones push the car up 3in or so smh and I'll be taking it in Sunday to see if its all set right
|
5.0 LsX
Member # 10017
|
posted
not that i know of, and you dont need the quads
|
93 5.0
Member # 12418
|
posted
Well hope Sunday it get fix thanks cafords
|