T O P I C R E V I E W
|
5.0 LsX
Member # 10017
|
posted
friend of myne has a 66' mustang w/ a 351w just did a 03' cobra disc brake conversion front and rear. were running the 94-95 m/c right now w/no booster, but looking for a power assisted setup that will clear his header and shock tower... any recommendations? so far an electric booster looks to be the only thing that might clear
|
70stang351w
Member # 9948
|
posted
i dont have an answer but was wondering which adapter kit did he go with for the cobra brakes?
Need to get better brakes on my 70, miss the cobra setup i had on my 96.
the only write up ive seen on the vintage venom said they used a 94 cobra m/c brakeboost but didnt give any answers as to why that one besides it would "boltin". that was also in a 69 coupe which has more room than 66. [ 2014-01-21, 03:48 PM: Message edited by: 70stang351w ]
|
bigstangs
Member # 7920
|
posted
Try mustang steve here is the link for the brakes adapter and the power brakes http://www.mustangsteve.com/cobrabrakes.html http://www.mustangsteve.com/BRAKES.html
|
Secnd2nun64
Member # 1431
|
posted
I was looking at this setup for mine.
http://www.cjponyparts.com/master-power-power-brake-conversion-kit-dual-bowl-disc-brakes-manual-transmission-1965-1966/p/BBCK8/
|
5.0 LsX
Member # 10017
|
posted
we went with the mustang steve brackets.
I was also looking at the kits on CJ, but I don't thing we have the clearance for the booster.
found this kit on ebay, and a couple pics on google and good reviews, looks like it will clear, but don't want to find out the hard way
http://www.ebay.com/itm/1964-66-Ford-Mustang-7-power-brake-booster-Master-cylinder-/331102689976
|
Duncan Motors
Member # 7045
|
posted
i think the stock booster is pretty smal to start with. im in the market of looking for one for 4 wheel disc, so maybe if u pick one up and it dont work i might reimburse u for it.
|
Secnd2nun64
Member # 1431
|
posted
Just make sure you get the one for your transmission type. If you have a manual trans, your options get limited since you need room for the clutch rod. I have power on mine right now with a single. Got any pics of the brakes done?
|
5.0 LsX
Member # 10017
|
posted
that was the other issue I forgot about, the clutch cable, tko swap... no pics on hand..if I get some later ill throw them on here. sounds like we will be trying the ebay kit..
|
dohcfox
Member # 12829
|
posted
93 cobra master cylinder has a smaller bore diameter if I remember right and has a awesome pedal feel without needing to use a booster. I could dig up some old paperwork but I built two cars with similar brake setups and no booster and the pedal feel was great. U would have never known it was non power,
|
Secnd2nun64
Member # 1431
|
posted
That eBay one you listed is for an automatic. I think they get the dual master cylinder in there by moving the whole unit closer to the firewall. (The brackets behind the booster look much shorter than mine.) This can't be done with a manual trams because of the clutch rod which is why most ads you'll see state automatics only.
|
5.0 LsX
Member # 10017
|
posted
quote: Originally posted by Secnd2nun64: That eBay one you listed is for an automatic. I think they get the dual master cylinder in there by moving the whole unit closer to the firewall. (The brackets behind the booster look much shorter than mine.) This can't be done with a manual trams because of the clutch rod which is why most ads you'll see state automatics only.
thanks for catching that, just the diameter of the booster looks like it will fit, but that's why I was asking.
|
5.0 LsX
Member # 10017
|
posted
quote: Originally posted by dohcfox: 93 cobra master cylinder has a smaller bore diameter if I remember right and has a awesome pedal feel without needing to use a booster. I could dig up some old paperwork but I built two cars with similar brake setups and no booster and the pedal feel was great. U would have never known it was non power,
thanks for the info, ill see if he wants to try that
|
Duncan Motors
Member # 7045
|
posted
this is pretty helpfull thanks guys!
|
project_stangs88
Member # 4599
|
posted
I did a Mustang steve kit on my 65.. $40 for plate and easy instructions...brake booster from 86 v6 mustang and master cylinder from 2000v6 mustang.. easiest upgrade iv ever done...I also have cobra brakes...
|
5.0 LsX
Member # 10017
|
posted
quote: Originally posted by project_stangs88: I did a Mustang steve kit on my 65.. $40 for plate and easy instructions...brake booster from 86 v6 mustang and master cylinder from 2000v6 mustang.. easiest upgrade iv ever done...I also have cobra brakes...
how is the pedal feel? are you a/t or m/t?
|
project_stangs88
Member # 4599
|
posted
I haven't started her up yet.in the middle of a full painless wire kit.. but I'm gonna need a vacuum pump cause my cam is big..need more vacuum..im running a c4
|
5.0 LsX
Member # 10017
|
posted
quote: Originally posted by project_stangs88: I haven't started her up yet.in the middle of a full painless wire kit.. but I'm gonna need a vacuum pump cause my cam is big..need more vacuum..im running a c4
thats the problem with the manual trans, the clutch cable comes out right above the m/c
|
dohcfox
Member # 12829
|
posted
I think the 93 cobra master cylinder was 7/8 bore diameter. But ideally the smaller the master bore size the more leverage you will have over the brakes making the pedal effort lighter. As far as getting a booster in there if that's the way you still want to go I'd look into what a power brake gta came with. Those cars had a 390 fe in em and those motors are huge compared to a Windsor
|
dohcfox
Member # 12829
|
posted
Just saw your post about the clutch cable. Yea everyone I know runs manual brakes with the cable setup. You could go to the old school z bar setup for the clutch
|
5.0 LsX
Member # 10017
|
posted
thanks for the input, probably going to try out the 93' m/c. he doesnt want to change the cable set up since its new, came w the tko conversion kit and fully adjustable
|
70stang351w
Member # 9948
|
posted
Any up dates?
|
5.0 LsX
Member # 10017
|
posted
quote: Originally posted by 70stang351w: Any up dates?
not yet...boss has too many projects and is just happy to be driving it. I test drove it w the sn95 m/c and it is pretty shitty..ill be sure to update whenever we get around to it
|