T O P I C R E V I E W
|
Andy9093
Member # 1959
|
posted
Wondering which head gaskets to use for my setup. Just blown the current one that are the felpro 9333pt2. And I really don't want grove the head or block for the wire oring thing.
Here's my current setup running 12#s of boost, AFR 185, 8:1 pistons. E303 cam.
Thanks in advance
|
92_5.0
Member # 7624
|
posted
I'm running a similar set up and use Fel-Pro 10112 http://www.summitracing.com/parts/fel-10112/overview/make/ford
|
79 cobra
Member # 10137
|
posted
fel pro 1133
|
racsirx
Member # 1710
|
posted
I like the felpro 9333pt1, if you blew them then I would say you have a problem with your tune or your block or heads aren't flat enough. You can setup your motor for MLS gaskets but if your tune isn't right, you wont blow a head gasket you can seriously damage your motor. Also if you are using a stock block with high HP with boost, I will say blowing head gaskets is normal
|
|