T O P I C R E V I E W
|
sleeperz
Member # 11609
|
posted
thinking of going 351w on my fox. and would like to keep my holley systemax intake. does anyone know who sells a lower intake for 351w based motor looked on line and couldnt find one no were. dont even think those are made. does anyone know
|
Greasy
Member # 5258
|
posted
I don't think Holley makes one, but there is the GT-40, TFS-R plus the Box-R, Edelbrock Vic Jr and Super Vic in EFI. Probably a couple more out there but that's all I can think of right now.
|
racsirx
Member # 1710
|
posted
I can't remember, getting old, but doesn't the 351 truck lower work with a Holley upper?
|
Ric88Notch
Member # 11660
|
posted
yeah the 351 lower works with the holley upper. same pattern.
|
Nifty50
Member # 9987
|
posted
quote: Originally posted by Ric88Notch: yeah the 351 lower works with the holley upper. same pattern.
Ric is right and you can find them on Ebay for $100-$200
|
sleeperz
Member # 11609
|
posted
I did went to pick n pull and looked on all 351trucks but they all had the lower intake like a stock 5.0 intake only found the matching one from a 302. I guess not all 351 trucks have it like a stock 5.0 intake then. Just gota keep looking on them trucks till I find one. Or go on eBay. Thanks guys
|
Duncan Motors
Member # 7045
|
posted
there will be one out there. unfortuntly the stock lower gets restrictive on the front two runners if u start pushing some air flow. a lil welding and porting can fix it tho.
|
samsbolt390
Member # 11645
|
posted
That looks like the 302 intake on my bronco, the 5.8 looks similar but has tiny oval ports and also why I thought I would use a 5.0 lower with spacers plates for the 5.8 deck..? Am i Wrong? This intake would save me lots o trouble.
|
Duncan Motors
Member # 7045
|
posted
they have 2 versions in both motor sizes. u just weren't lucky your first looky at the junk yard. there are out there. get off the computer and go look again.
|
50DADDY
Member # 3076
|
posted
Systemax upper DOES NOT match the truck lower.Its close,but not close enough in my opinion.Youd have to weld and work it to match up correctly.
|