T O P I C R E V I E W
|
clone nprogrss
Member # 10342
|
posted
jst got my gaskets in 2day n will try n start takin everything apart for the hci swap!!besides the cam would sitting these heads b sumthing i should wait to do until i get proper supervision or is it really not that hard? will need help if anys out there that dnt mind HELPING out!!
|
nasty93
Member # 8935
|
posted
get in there and go for it. not too hard.i used a haynes manual my first engine build. dont rush..this room has alot of good people with advice too if u get hung up on somethin
|
clone nprogrss
Member # 10342
|
posted
quote: Originally posted by nasty93: get in there and go for it. not too hard.i used a haynes manual my first engine build. dont rush..this room has alot of good people with advice too if u get hung up on somethin
ey thnks for the encouragement!!i jst dnt want to get in2 sumthin too mind boggling
|
x42bnx
Member # 9529
|
posted
It's straight forward with a pushrod, well atleast 302's, 350's, 305's etc. Just make sure to look at torque specs and how many stages they say to torque them.
|
79 cobra
Member # 10137
|
posted
if u need help im always down 2 help out just give me a call and if u need any tools its all good
|
clone nprogrss
Member # 10342
|
posted
quote: Originally posted by 79 cobra: if u need help im always down 2 help out just give me a call and if u need any tools its all good
good lookin bruh!!ima damn near start wednesday or thursday latest friday!! i'll let u kno, appreciate it!
|
SSF 50
Member # 7219
|
posted
its easy (well 4 me it is lol ), but if ur a wrencher its pretty simple,few good things is make sure everything is clean, re-tap all treads,get / do the rite torque specs & in steps & order of each bolt, double check each thing u do, & take ur time.....
|
707notchback jaejae
Member # 7958
|
posted
simple...
|
gercolla1
Member # 3068
|
posted
quote: Originally posted by SSF 50: its easy (well 4 me it is lol ), but if ur a wrencher its pretty simple,few good things is make sure everything is clean, re-tap all treads,get / do the rite torque specs & in steps & order of each bolt, double check each thing u do, & take ur time.....
+1
|
93ChpLuu
Member # 10787
|
posted
Just take your time on everything dont rush it
|
clone nprogrss
Member # 10342
|
posted
quote: Originally posted by 707notchback jaejae: simple...
for u!!! this my first rodeo here bro!!
|
707notchback jaejae
Member # 7958
|
posted
lol i tackled mine for my first try..very easy..just take your time..clean all threads in the block..use teflon paste on your lower bolts on the heads..
|
Built90GT
Member # 10758
|
posted
quote: Originally posted by 707notchback jaejae: lol i tackled mine for my first try..very easy..just take your time..clean all threads in the block..use teflon paste on your lower bolts on the heads..
good advice I learn new things everyday
|
clone nprogrss
Member # 10342
|
posted
appreciate the advice folks!!
|