T O P I C R E V I E W
|
BLoWN FR500
Member # 8766
|
posted
I want to install a Tko500 in my fox. It has a 10 spline input and I believe a 31 output on the tranny. My concern is does the cross member or the drive shaft need to be upgraded in this process or can you use the stock parts.
|
70mach351
Member # 7528
|
posted
you eill need to upgrade to a 31 spline yoke for your drive shaft and will have to grind the welds off yoyur current k member or order the adjustable FMS one from summit or like place. I believe you will need a new bellhousing or scatter shield as well.
|
BLoWN FR500
Member # 8766
|
posted
I already have the 31 spline yolk, also got the bellhousing. I don't think I need to change the k member to install the tranny! I've never heard of that before. I appreciate the help bro
|
70mach351
Member # 7528
|
posted
If you dont get the adjustable u have to grind the welds in yours
|
Nasty Notch
Member # 8863
|
posted
he means crossmember not k-member were both in the same boat in going the same thing as u
|