T O P I C R E V I E W
|
166 Merlot
Member # 1549
|
posted
is there a tool you can rent to replace these? has anyone bought the one maximum sells and would like to lend/rent it out? I'm trying to make it to the track on saturday, help a fellow caforder out
|
92stangLX
Member # 3252
|
posted
I have the tool I will sell you for $30.
LMK
|
166 Merlot
Member # 1549
|
posted
coo check pms
|
itznotahighway
Member # 7934
|
posted
quote: Originally posted by 166 Merlot: coo check pms
hey im bought the tool, should come in this week... you can borrow it if you want,call eddie around the end of the week...
|
166 Merlot
Member # 1549
|
posted
itznotahighway right on man, i'm still going to be needing that, so thanks bro!
Now the next question, how do you put the new bushings back in? hammer?
|
Blind
Member # 3052
|
posted
quote: Originally posted by 166 Merlot: itznotahighway right on man, i'm still going to be needing that, so thanks bro!
Now the next question, how do you put the new bushings back in? hammer?
put them in your freezer overnight before you take out the old ones, they'll go in a whole lot easier than the old ones come out.
|
vpr_klr
Member # 3353
|
posted
You can use a large drill bit to drill out the rubber and then use a hammer to collapse the shell. Pull the shell out with some pliers.
Then with a large socket, or a piece of pipe of the correct size against the shell, hammer the new ones in.
or better yet, use an air hammer and it will take 2 seconds.
|
badazlx
Member # 4899
|
posted
+1 on the air hammer, my favorite tool. it never leaves my side
|
92stangLX
Member # 3252
|
posted
quote: Originally posted by 166 Merlot: itznotahighway right on man, i'm still going to be needing that, so thanks bro!
Now the next question, how do you put the new bushings back in? hammer?
The MM tool will take them out and also can be used to put them in.
|