T O P I C R E V I E W
|
ilya
Member # 6164
|
posted
I will need someone to do some basic stuff for me. I need an O2 sensor replaced, and a turn signal switch replaced (easy job, but I can't seem to find the right tool for getting the weird bolts off the column cover). Maybe also change my plug wires, but I might be able to do that one myself.
PM me if you'd like to help me out.
Thanks.
|
EASTBAY5_0
Member # 2683
|
posted
These repairs can be done with little experience and ordinary hand tools. Ive done it before ad have some tips.
If this is for a fox, The turn sigal switch cover is held on by 3 phillips head screws. Two long and one short I believe. Once the cover is off, remove the 2 screws that hold the switch to the column.Then unplug the electrical connector at the switch. Installation is reversal of the removal.
On the plug wires, replace one at a time. start with the shortest wire (coil) to then the longest.
For the 02 you must get a deep socket to remove the old one. also make sure u use anti-seize when installing the new one.
what year is your car btw? [ December 01, 2006, 02:53 AM: Message edited by: EASTBAY5_0 ]
|
ilya
Member # 6164
|
posted
Thanks. I keep forgetting to post the year of my car when making topics. It's '96 Cobra.
The steering column cover on these cars is just stupid to take off - the holes are small in diameter, very deep, with a strange bolt at the end of each one that I don't seem to have a bit for.
As for O2 sensors - I have no way of getting under the car, so I need someone to do that for me.
Thanks for the tips.
|
red GT black rallyes
Member # 4495
|
posted
What part of cali u in bro I could do it for u let me know
|
ilya
Member # 6164
|
posted
Hey, I'm in San Francisco.
|
Jmir018
Member # 1414
|
posted
come over to my house and we'll get it done-keyword "we" ... just bring me some water.. maybe fast food i haven't had fast food in a long time.
look at my sig, no need for proffessional help.
|