T O P I C R E V I E W
|
PopTheHood
Member # 7040
|
posted
would you be able to use a stage 2 trickflow cam with these pistons? or how big could i go with them? with 1.6 rockers [ November 09, 2006, 07:21 PM: Message edited by: PopTheHood ]
|
PopTheHood
Member # 7040
|
posted
Any thoughts? Yes...No...Maybe...Who knows?
|
white50steve
Member # 5887
|
posted
tell us more like what brand are the pistons, what size are the valve reliefs, what heads, what size valve. most aftermarket pistons have a pretty good size relief and you should be able to run a trickflow stage 3. always check piston to valve clearance if your unsure
|
93mustang50
Member # 6642
|
posted
Your valve reliefs look deep, but that picture doesnt show how much deck spacing you have left. i guess do the playdough test, it never lies. GO FAST! SHAKE N BAKE!!!!
|
93PONY
Member # 60
|
posted
TFS 2 is small. I've seen it fit with stock pistons, TW's & 1.6's. Those pistons can run a MUCH larger camshaft....like an XE282 or 292 with no problem at all.
TW heads have more room (piston to valve) than an inline 20 degree head. But again, even if you were running VicJr's with a 2.05 valve & had them milled to 53cc's, you'd still have no problem with P2V using the TFS 2.
|