T O P I C R E V I E W
|
DOPE 50
Member # 5892
|
posted
Hey whats up guys i just wanted to know if Foxbody and 94-95 seats brakets have the same seat measurements (bolt in Measurement)?Any help would be great thanks guys
|
BlackNGold
Member # 655
|
posted
As far as I know the bolt pattern is the same... So just take the SN95 seats with the brackets and all and bolt them into your Fox...Takes like 20 minutes...
|
blind
Member # 3052
|
posted
quote: Originally posted by BlackNGold: As far as I know the bolt pattern is the same... So just take the SN95 seats with the brackets and all and bolt them into your Fox...Takes like 20 minutes...
but then your seat will be almost 2" higher off the floorboards than the foxbody brackets.
the seats bolt in, but the height is different.
Foxbody seat brackets do bolt onto sn95 seats perfectly fine though, and bring the seats back down to a more reasonable level so it doesn't feel like you're sitting on a stool in the car.
|
BlackNGold
Member # 655
|
posted
Great info...Thanks
|
DOPE 50
Member # 5892
|
posted
Thanks for the info guys
|
95GTConvtACE
Member # 6399
|
posted
I was told they do. I recently replaced mine with some 2001 seats. The bolts lined up perfectly. The only problem I had was the power to the driver seat. I figured it out pretty quickly because it was simple electricity.
|
50Reasons
Member # 6452
|
posted
should have pluged right in alan. you get that car in yet?
|
95GTConvtACE
Member # 6399
|
posted
quote: Originally posted by 50Reasons: should have pluged right in alan. you get that car in yet?
They don't plug in because different plug ends. And no I didn't get it in. I am about 50 hours already at work and I got about 2 mor days before day off.
|
95GTConvtACE
Member # 6399
|
posted
quote: Originally posted by 50Reasons: should have pluged right in alan. you get that car in yet?
They don't plug in because different plug ends. And no I didn't get it in. I am about 50 hours already at work and I got about 2 more days before day off.
|