T O P I C R E V I E W
|
8850GT
Member # 5909
|
posted
b cam with 1/7's with fresh gt40 irons (stock springs.. .520 lift???) on a stock bottom end...? WOULD IT WORK?
|
8850GT
Member # 5909
|
posted
JohnB...? Or someone as knowledgable...?
|
silverLX
Member # 3207
|
posted
yes
|
NO MANRZ
Member # 566
|
posted
It should be about the same as an F cam.
|
66 AC COBRA
Member # 904
|
posted
will clear fine
how is it the same as an f cam
|
JohnB
Member # 969
|
posted
He's talking about lift. It will be near .520 lift with the 1.7's factored in. It will work. Check your P to V clearance if you have any concerns.
|
66 AC COBRA
Member # 904
|
posted
quote: Originally posted by JohnB: He's talking about lift. It will be near .520 lift with the 1.7's factored in. It will work. Check your P to V clearance if you have any concerns.
but everything else is not even close to the same
|
BOOSTnJUICE
Member # 5029
|
posted
the difference in lift between a 1.6 and a 1.7 would be .015 so the B cam being .480 lift would then be actually a .495 lift...correct me if im wrong.
|
HaulinAssMaro
Member # 541
|
posted
quote: Originally posted by BOOSTnJUICE: the difference in lift between a 1.6 and a 1.7 would be .015 so the B cam being .480 lift would then be actually a .495 lift...correct me if im wrong.
The lift will be .510
|