T O P I C R E V I E W
|
skydawg187
Member # 8623
|
posted
So like the title says totaled my 88 Gt and my loss is your gain. Worked on this car for over a year and only had it running for a month before I killed it. Anyways, The motor took most of the impact as I hit a tree dead center. 90% of the work and custom parts are undamaged and still on the car. Dont really have the heart to part it out would like to sell the whole thing to someone that wants a badass setup for there project. I want 2800obo......... I have reciepts for over 3500 woth of parts plus 1000 in rims and tires. This truly is a great deal... Ok here we go:
95 rearend with auburn posi and 3.73 gears 5 lug cobra brakes with maximum motorsports steelbraided lines(right, left and rear to chassis) 95 Cobra Front spindles 5 lug with steel braided lines (right and left maximum motorsports) Maximum motorsports 95 cobra master cylinder and proportioning valve eliminator kit(connects hard lines to mastercylinder for 87-93 foxbody) Maximum motorsports adjustable proportioning valve This is everything you need to do a complete disk brake conversion except the emergency brake cables. Stops on a dime! Suspension: Front Upr front coil over kit with QA1 springs Upr Extreme bumpsteer kit Upr Caster/Camber plates Upr Tubular A-arms (The K-member was ruined in the wreck new one is 350) Rear Fully adjustable coilover kit from Upr with QA1 springs Upr tubular lower control arms Upr fully adjustable upper control arms Upr spherical bushings This setup handled like a dream and the stance was killer! Rims and Tires: Ford OEM silver FR500s 18x9 +24 offset(3 are perfect 1 has a tiny curbed spot) Tires are Sumitomo 225/40R18s very low profile all have 95% tread seriously brand new less than 1000 miles on em. Engine Parts: Like I said the motor took most of the hit so I dont know if the block is toast or not. However lots of aftermarket stuff survived: BBK Cold air intake BBK Longtube headers(have catted mids but they where also damaged, definately fixable) Upr Adjustable clutch quandart and firewall Msd 6AL Ignition box with rev limiter Msd Coil with harness adapter plugs right into harness Msd cap and rotor kit SCT 4 bank Eliminator chip with custom tunes for life. Has custom tunes with all aftermarket parts set up all you need is an underdrive pulley kit( BBK $100)Has switch in glove that controls settings with the race tune and 91 octane there was a huge difference in hp and torque. Interior: Has a blck dash and carpet kit nice condition A kenwood deck with remote custom 6 speaker setup and 2 10' subs in a box with 2 amps 1 for the speakers 1 for the box. I have picks before the crash and after I can send them to your email or text them to you.
Oh it also has an aluminum driveshaft but I dont know if it was damaged or not. I also have a motor with a blown head gasket and a t-5 tranny that needs to be rebuilt. Getting out of mustangs for now come get all this great stuff!
|
skydawg187
Member # 8623
|
posted
picks are in my photos if you wanna check em out
|
89chpcoupe
Member # 6046
|
posted
How much for the motoe? How many miles?
|
BackwardSnake
Member # 10857
|
posted
2800, sweet deal, should sell fast
|
dubfive-0
Member # 8965
|
posted
You should post pictures of it...
|
89chpcoupe
Member # 6046
|
posted
How much for the motor that has blown headgasket?
|
p5.0
Member # 6160
|
posted
how much for the rims
|
FOXX5.0
Member # 9094
|
posted
How much for the whole 5 lug set up front n back and brake cylinder pm the price
|
skydawg187
Member # 8623
|
posted
Ok so the motor with the blown head gasket I will sell for 200...... the rest I really don't want to separate its all on the vehicle still and don't really want to part it out. Neighbor has a flat bed trailer come buy it I will follow you home. Take what you want and part the rest if you want you might get what you want for free. I don't have the time. Click my photos check it out. Thanks
|
Blk93Pony
Member # 10798
|
posted
What a shame
|
89chpcoupe
Member # 6046
|
posted
Is the motor complete?
|
skydawg187
Member # 8623
|
posted
Motor is complete without front accessory brackets and egr spacer
|
STANGBOY
Member # 7868
|
posted
very good deal
|
STANGBOY
Member # 7868
|
posted
ttt couldnt come up with the money
|
skydawg187
Member # 8623
|
posted
Sold!!!! To all the obviously intelligent people out there that took the time to read my ad and contact me about parting it out...... STOP BEING IDIOTS!!!! Thank you and good day!
|