T O P I C R E V I E W
|
cobraracer46
Member # 1142
|
posted
Up for sale for $285 shipped plus 3% for paypal fees is a almost new new #3806 Innovate motorsports LM-2 Wideband Kit: Single Sensor OBD-II unit with a brand new never used Bosch wideband sensor. Warranty start date on this unit is 4-28-11 and will be in effect until 10-28-11
Send an email if you are interested in the wideband kit. Thanks!
Weld in bung is not included but can be purchased for around $5 from this company Home » Shop » Wideband O2 » O2 Bungs & Plugs » Stainless Steel Wideband O2 Sensor Fitting - Weld in type - Female Nut
Included in this kit: 3806 Innovate motorsports wideband hand held unit. brand new Bosch wideband sensor bung plug 2GB SD card SD card reader power adapter OBD II cable logworks software RPM cable USB cable to upload logs Carry case
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter's award-winning digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2's self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.
Patented "Direct Digital" Wideband Technology Wideband O2 Compatible with ALL fuel types Single or Dual Channel Version Available OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data Log directly to SD card (included) Playback log data on screen and/or with powerful LogWorks software (included) Large high-contrast graphics LCD Built-in RPM converter (direct frequency or with optional inductive clamp) 4 fully-differential analog inputs 2 configurable linear analog outputs Positive lock connectors for all connections Innovate MTS serial IN and OUT USB connection to your PC The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.
|
cobraracer46
Member # 1142
|
posted
Here is a Youtube video showing the fetures of the Innovate motorsports Lm2
http://www.youtube.com/watch?v=NBCBZVlomRg
|
sinisterblk
Member # 8425
|
posted
read the description better, answered my question. glws [ August 10, 2011, 11:03 AM: Message edited by: sinisterblk ]
|
cobraracer46
Member # 1142
|
posted
Sold!
Fuckin low ballers always crack me up. [ August 13, 2011, 09:08 PM: Message edited by: cobraracer46 ]
|
|