T O P I C R E V I E W
|
Dag302
Member # 4682
|
posted
GT40 Heads Hot tanked, beaded, magged and resurfaced 3000 miles ago by Gromm Racing Heads in San Jose At that time they received: New Valves with valve job Comp Cam Springs Pocket port and chamber re-work Intake port matched to Fel-Pro 1250 Manley Retainers and locks Heads are complete and ready to bolt on Cobra 1.72 Rockers $400 heads
Custom ground Comp cam 516 lift with 1.72 rockers 218 duration @ .050 intake 224 duration @ .050 exhaust 114 lobe seperation $100
Selling complete off 93 Cobra. Nothing wrong with anything just upgrading to a new top end. Have receipts from Gromm Racing to prove work. [ November 03, 2006, 12:17 AM: Message edited by: Dag302 ]
|
two-gun kid
Member # 5891
|
posted
how much for the heads is you decide to part them out.
|
Dag302
Member # 4682
|
posted
with or without rockers? 400 without 450 with
|
two-gun kid
Member # 5891
|
posted
quote: Originally posted by Dag302: with or without rockers? 400 without 450 with
hmmmm, let me talk to my friend and see what he wants to do.
|
Dag302
Member # 4682
|
posted
I guess I will break it down since I have had quite a few responses.
Heads (no rockers) 400 Heads (with rockers) 450 Intake (with throttle body) 350 93 Cobra Valve covers 50 Custom Cam 100
|
Dag302
Member # 4682
|
posted
ttt
|
Dag302
Member # 4682
|
posted
make offers
|
Dag302
Member # 4682
|
posted
ttt
|
Dag302
Member # 4682
|
posted
ttt
|
svt306snake
Member # 1967
|
posted
great prices for great stuff
|
Dag302
Member # 4682
|
posted
sold intake and tb
|
WESTsacFIFTYS
Member # 7048
|
posted
WILL THOSE HEADS WORK WITH A HYDRAULIC CAM? THERS A HYDRUALIC CAM IN MY 306 SITTING ON AN ENGINE STAND. THE SHORT BLOCK WAS SET UP FOR HYDRAULIC CAM SO I CANT USE HEADS FROM 87-93 LIKE YOURS, IF I GOT A ROLLER CAM, WOULD I BE ABLE TO USE THOSE HEADS WITH NO PROBLEM?
|
WESTsacFIFTYS
Member # 7048
|
posted
ALOT OF TIMES I CANT FIND THE POSTING AGAIN SO I CAN SEE A RESPONE, PLEEEEEASE RESPOND TO MY EMAIL WESTSACRAMENTOPEEP@SBCGLOBAL.NET K THNX
|
asskickn88
Member # 4957
|
posted
quote: Originally posted by WESTsacFIFTYS: WILL THOSE HEADS WORK WITH A HYDRAULIC CAM? THERS A HYDRUALIC CAM IN MY 306 SITTING ON AN ENGINE STAND. THE SHORT BLOCK WAS SET UP FOR HYDRAULIC CAM SO I CANT USE HEADS FROM 87-93 LIKE YOURS, IF I GOT A ROLLER CAM, WOULD I BE ABLE TO USE THOSE HEADS WITH NO PROBLEM?
These heads will work fine with a hydraulic cam.
|
Dag302
Member # 4682
|
posted
ttt
|
WESTsacFIFTYS
Member # 7048
|
posted
TRADES OR PARTIAL TRADES? ANYTHING YOU NEED? HEADS, UPPER AND LOWER,?
|
WESTsacFIFTYS
Member # 7048
|
posted
YOOOO DAG.... WILL YOU TRADE FOR UPER AND LOWER TRICK FLOW TRACK HEAT SET UP WITH SPACER KIT? OR GT40P HEADS?
|
Dag302
Member # 4682
|
posted
sorry, I do not need heads or a intake.
|
Dag302
Member # 4682
|
posted
SOLD
|