T O P I C R E V I E W
|
notch306
Member # 12061
|
posted
I installed 315s on my car and the inside of my tire is touch the inner fender well. If i beat the fender well will that help? Or what should i do?
|
510.86.notch
Member # 9892
|
posted
Yes that is what's needed.good to see my old car still alive.
|
ed650
Member # 9897
|
posted
86 on da machs has 315s on his and all he did was beat the inner fender. What about a thin spacer?
|
notch306
Member # 12061
|
posted
quote: Originally posted by 510.86.notch: Yes that is what's needed.good to see my old car still alive.
Im trying to get it done bro if i decide to sell it ill let u know first
|
notch306
Member # 12061
|
posted
quote: Originally posted by ed650: 86 on da machs has 315s on his and all he did was beat the inner fender. What about a thin spacer?
Im going to try to beat the inner fender first i think that is what needs to be done
|
i
Member # 12534
|
posted
Nice car! Have you tried rolling them?
|
a302juGRnot
Member # 10163
|
posted
use a small spacer and roll the fenders till its as flat as possible [ 2015-08-01, 03:41 AM: Message edited by: a302juGRnot ]
|
510.86.notch
Member # 9892
|
posted
quote: Originally posted by a302juGRnot: use a small spacer and roll the fenders till its as flat as possible
+1.this is also a option.
|
notch306
Member # 12061
|
posted
quote: Originally posted by i: Nice car! Have you tried rolling them?
I rolled them already but its the inner fender well wall
|
510.86.notch
Member # 9892
|
posted
quote: Originally posted by notch306: quote: Originally posted by i: Nice car! Have you tried rolling them?
I rolled them already but its the inner fender well wall
A small spacer will bring the wheel out a little.if you have room on the outside.if not you have to beat the inner wheel well.mostly where those two seems meet next to shock.they will cut your tire off.then work your way up from there.theres not much room in there to swing a hammer also.
|
STREETFIGHTER50
Member # 2973
|
posted
BFH will do the trick
|