T O P I C R E V I E W
|
notch306
Member # 12061
|
posted
I was thinking of installing foxbody seat in my 67 mustang because i would like my seat to recline and the original seats dont i was just wondering will they bolt in with out any problems?
|
86_on_DD_machs
Member # 11083
|
posted
You might be able to swap the rails maybe??
|
notch306
Member # 12061
|
posted
quote: Originally posted by 86_on_DD_machs: You might be able to swap the rails maybe??
Ok im going to check it out
|
86_on_DD_machs
Member # 11083
|
posted
quote: Originally posted by notch306: quote: Originally posted by 86_on_DD_machs: You might be able to swap the rails maybe??
Ok im going to check it out
I have 01 seats in my 86, I just swappedthe rails but I feel you on the reclining part mine don't go all the way back so kinda sucks
|
67-7THREE
Member # 11207
|
posted
i had them in my 70 cougar (somewhat same floorboard/seat mounting) and i had to redrill it to fit the fox rails, if i remember, the 67 rails wouldnt fit on the fox seats. dont remember tho.
|
notch306
Member # 12061
|
posted
Ok thanks u guys. Im gonna do what ever i need to do to get it done
|
69stangin
Member # 5609
|
posted
Take pictures of the progress please
|
notch306
Member # 12061
|
posted
quote: Originally posted by 69stangin: Take pictures of the progress please
Ok i will bro
|
Duncan Motors
Member # 7045
|
posted
the seat in a fox lower ori mounting panel is stepped, the old school is flat but raised a couple inches. if u put a step in the old school it might help an then u can use the stock seat rails, but both rails are different and prob spend more time adapting rails then adapting the floor, curious about the height though, i put some kinda honda seat in my old school and they sat high cause of the raised floor on the old school, gd luck!
|