T O P I C R E V I E W
|
Jim Wood
Member # 5531
|
posted
Hey guys/gals,
I have a 89 Notch that has been converted into a full road race car and is not street legal. All the emission stuff has been removed.
The engine goes way down on power after a little heat gets into the engine.
I need help diagnosing the problem. Any shops out that can be recommended?
I'm in Sacramento, and don't want to trailer the car to far.
Thanks
|
SlowStockFox
Member # 1081
|
posted
there is alot of people around sac that could help. what set up is on the motor. i think a little more detail would be helpfull
|
Jim Wood
Member # 5531
|
posted
It's basically a stock FI 5.0 motor with painless wiring, and stock computer.
Nothing to challenging, but I doubt a scan tool is going to pinpoint the problem.
|
FoX GT
Member # 4587
|
posted
If you're in Sacramento try out Advanced Engine Development. Shaun's phone number is 916-715-7569 and Drew's number is 916-275-8212. Their website is http://www.advancedenginedevelopment.com
|
jordan_0806
Member # 5888
|
posted
try out:
Norcal Motorsports Address: 4631 Auburn Blvd, Sacramento, CA 95841 Phone: (916) 482-5535
Ask for Jay....
he'll get you set up
|
Jim Wood
Member # 5531
|
posted
Nice. Thanks for the help guys. I called both shops very helpful! [ August 08, 2008, 05:10 PM: Message edited by: Jim Wood ]
|
JohnB
Member # 969
|
posted
If you pulled all the emissions equipment, you probably pulled the charcoal cannister...and capped the line. Tank still needs to be vented. Seen this one way too many times.
|
turbo50
Member # 6700
|
posted
quote: Originally posted by JohnB: If you pulled all the emissions equipment, you probably pulled the charcoal cannister...and capped the line. Tank still needs to be vented. Seen this one way too many times.
x2
|