This is topic What can I use to glue my cobra plaque back on my valve cover ? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029849

---

Posted by RaulGT1991 (Member # 13992) on :
 
What can I use to glue my cobra plaque back in my valve cover ?? Double sided tape ??
 

---

Posted by 92_5.0 (Member # 7624) on :
 
Try Loctite
 

---

Posted by Martinna (Member # 12493) on :
 
Tape will dry out over time. Thoroughly degrease the covers and use an epoxy based glue like JB Weld that can take the heat cycles.
 

---

Posted by 87droptop50 (Member # 7185) on :
 
3m double sided tape will do the job. Just degrease it before applying
 

---

Posted by Fostang (Member # 3752) on :
 
Clean and use gray rtv tape it for a day or two and should glue perfectly and last the heat cycles.
 

---

Posted by Martinna (Member # 12493) on :
 
Guys above are right, the high quality 3M tape will work better cleaner than glue as long as you fully degrease and dry the valve covers first.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com