This is topic smog due: p1443 obdii code in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029337
Posted by Frank.JD.Perez (Member # 12650) on :
 
Hey guys,
So my car is due for smog pretty soon and since ive had my car the p1443 evap code has been thrown. I know that there are plenty of different things that could throw the code but whats the most common? Its a 97 gt
 
Posted by 70stang351w (Member # 9948) on :
 
check the line that runs from the back of the intake plenum to your passengers side fender the line connects i believe to an inline sensor then the evap canister which the line disappears in to the fender and attaches to a hard line check the entire rubber hose and or replace it if its the stock line might very brittle or the vac canister is messed up. mine all 3 things need to be replaced (the rubber lines, vac canister, and sensor.)
 
Posted by Frank.JD.Perez (Member # 12650) on :
 
70 you always have answers for me man, youre awesome
 
Posted by hurting your feelings (Member # 13641) on :
 
The grommet for the fill neck is common for evap leaks.an so is the canister purge valve.
 
Posted by 9cobrasvt8 (Member # 11078) on :
 
I had to replace all the rubber hoses for mine, i also put clamps on them lol, also had to do purge valve and solonoid if i spelled that right lol
Good luck bro [patriot]
 
Posted by 70stang351w (Member # 9948) on :
 
I spent a lot of time on forums for when i had my 2v and 4v swap. my npi motor had nearly 220k on it when i swapped it out, everything was stock on the car except kn filter and hill billy welded flows and truck size tips; swear the day after i got it home it popped this code and several others. and spent many times back and forth to the parts store. after awhile i just started replacing all the hoses and sensors throughout the car. most swapped over to the 4v swap so didnt have to buy more than twice.

As 9cobrasvt8 said above i also put clamps on everything also

[ 2015-01-08, 09:47 PM: Message edited by: 70stang351w ]
 
Posted by Tom Renzo (Member # 13165) on :
 
Purge solenoid is the code you are getting. Go there

[ 2015-01-09, 02:47 AM: Message edited by: Tom Renzo ]
 
Posted by Frank.JD.Perez (Member # 12650) on :
 
Replaced that solenoid yesterday and reset the obd. Lets see if it was a simple fix, thanks guys!
 
Posted by 9cobrasvt8 (Member # 11078) on :
 
quote:
Originally posted by Frank.JD.Perez:
Replaced that solenoid yesterday and reset the obd. Lets see if it was a simple fix, thanks guys!
Did you ever fix this?
 
Posted by Frank.JD.Perez (Member # 12650) on :
 
quote:
Originally posted by 9cobrasvt8:
quote:
Originally posted by Frank.JD.Perez:
Replaced that solenoid yesterday and reset the obd. Lets see if it was a simple fix, thanks guys!
Did you ever fix this?
Yea man thanks for asking! I actually had to replace the two solenoids and the hoses but passed smog a few weeks back
 
Posted by 70stang351w (Member # 9948) on :
 
Glad to see you where able to fix 9cobrasvt8 didnt have the same issue?
 
Posted by 9cobrasvt8 (Member # 11078) on :
 
quote:
Originally posted by 70stang351w:
Glad to see you where able to fix 9cobrasvt8 didnt have the same issue?
Ya i did on the cobra, now ive got the same issue on my gt lol, found a hose im gonna replace tomorrow and see what happens, plus the filler neck wasnt pulled all the way up and bolted in so im not sure if the gas cap was on tight enough either. I fixed that issue now for the hose tomorrow, probably all the hoses and see if that fixes it, if not then ill do the sensors/solonoids
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com