This is topic Where to place Tempature Probe for DCC??? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=028453
Posted by 3-0-Tunes (Member # 8105) on :
 
After installing an electric fan with a temp probe that activates the fan at a certain temperature I'm kind of lost if I have it in the right spot. I have a stock radiator and the probe is placed through the front of the radiator pointing TOWARDS the engine. I have this inserted about 5in' above the bottom hose on the radiator. Is this the correct location for the probe????
 
Posted by 3-0-Tunes (Member # 8105) on :
 
Anyone?
 
Posted by 91redmustang (Member # 10019) on :
 
I installed a flexalite one.... and the instructions say to install it about 1" from the inlet hose(installed mine right next to it), with the it facing out towards the bumper leaving 1/4" of the probe protruding.

[ 2013-10-08, 08:29 AM: Message edited by: 91redmustang ]
 
Posted by Stang66 (Member # 10504) on :
 
You might want to install it by the upper hose [Big Grin]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com