This is topic how much would you pay? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=026302
Posted by rayski25 (Member # 11363) on :
 
im going to be buying a block out of a fox pretty soon to have rebuilt them put into my DD, i have nooo idea how much i should be looking to spend i would like a few upgrades with the rebuild (.30 over stock heads ported upgraded springs an a cam) how much you think a little set up like this will run me? an any good shops near merced/fresno/modesto
 
Posted by RONIN (Member # 9987) on :
 
800-1500 give or take a few hundred in either direction.
 
Posted by rayski25 (Member # 11363) on :
 
ok thats no to to bad, is that a good set up a e303 cam an the stock heads ported?
 
Posted by norcalfiddy (Member # 11207) on :
 
quote:
Originally posted by rayski25:
ok thats no to to bad, is that a good set up a e303 cam an the stock heads ported?
gt40 or gt40p's would be alot better with that cam. i wouldnt waste the time with e7's. i was planning on running them for a while till i got a valve job on my P's, but ended up just getting it done now.

im building my motor rite now, with a e303, ported gt40p's and a eddy rpm intake. should be a decent runner.

[ February 29, 2012, 01:29 AM: Message edited by: norcalfiddy ]
 
Posted by RONIN (Member # 9987) on :
 
GT-40P heads , B303 cam and an Explorer intake on a stock bottom end 302 and other bolt ons can you into the high 12's low 13's in a decently modded fox.
 
Posted by rayski25 (Member # 11363) on :
 
quote:
Originally posted by RONIN:
GT-40P heads , B303 cam and an Explorer intake on a stock bottom end 302 and other bolt ons can you into the high 12's low 13's in a decently modded fox.
Ok I might go with that depending on funds, I mean I'm not trying to have a track car this will be my DD but hey why not right...thanks for the input guys
 
Posted by 1FAST89GT (Member # 5071) on :
 
dont forget to hupgrade the valve springs. coil bind is a bitch [Wink]

[ February 29, 2012, 02:47 PM: Message edited by: 1FAST89GT ]
 
Posted by just_another_ 91 (Member # 9317) on :
 
E7 heads are ok once they are ported i have ported e7 heads and a trick flow stage one cam with the trick flow cam with 3.08s and running 13.3
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com