This is topic Paxton Novi 1220SL or Vortech V3 Si trim in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=021549
Posted by Blubyu87gt (Member # 9427) on
:
Looking at both systems and the Paxton looks good (only a hundred or so more in cost) because its self lubricating.. Anyone one here have any insight?
[ January 22, 2010, 04:26 PM: Message edited by: Blubyu87gt ]
Posted by 89bluenotch (Member # 7454) on
:
I have heard nothing but good things about the novi 1220 lately. I to am deciding between the novi and the vortech for my next mod.
Posted by CHP2981 (Member # 9240) on
:
The first 1220 i got was cool i did alot of searching and i got that one from Summit for 22hundred. The only thing was the discharge pipe cracked on my strut tower. The one i have now i got from Jegs for 2100 and i an't had any problems. But when you start adding things then you have to tune it. It took about 8 hours to install because i an't all that good at it. The cutting of the shroud because of my bigger radiator. The Vortech kit was a little cheaper but it had a six rib setup. so i went with the Novi with the 8 rib setup. but if you don't know Vortech and Paxton are the same company now, as some of my Paxton stuff had Vortech on it. The 1220 only puts out 5 or 6 psi i don't know about the SCi.
[ January 22, 2010, 10:27 PM: Message edited by: CHP2981 ]
Fueled by Ford Mustang Owners
on CaliforniaFords.com