This is topic MAF?? 30lb injectors in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=019742

---

Posted by jareds98gt (Member # 7701) on :
 
i just picked up an strim for my 97. its a stock motor, gonna be running the 6lb pulley, the guy was running red 30lb injectors. will those be ok for 6lbs??? what MAF should i go with?
 

---

Posted by CA FiveOh (Member # 7429) on :
 
Did it come with an FMU? 30 lb'ers might be really close to maxxed without the use of an FMU. I would recommend going with 42 lb'ers, getting either a PMAS or Abaco DBX, and not running an FMU....this way you'll have some headroom if/when you decide to change pulleys. You may need a chip to get the car running good...especially with the PMAS as the computer may not be able to hit the MAF Minimum test voltage, which will send a check engine light.

What kind of fuel pump are you going to run? What other kind of Mods have been done?
 

---

Posted by jareds98gt (Member # 7701) on :
 
car has a full aeromotive fuel system, so that is no problem. i was thinkn about gettn some 42lb injectors and a lightning maf??
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com