This is topic Changing motor mounts in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=015441
Posted by adower (Member # 5955) on
:
Im going to attempt to change my motor mounts here soon. Currently have solid mounts and going to es poly's.
Gonna go with the 2x4 under the oil pan and jack it up method. Ive read I should loosen fan shroud and watch for hoses and what not. Anyone have anything else to add or what to watch for ?
Thanks!
Posted by red GT black rallyes (Member # 4495) on
:
thats about it , just watch for clearence in the back and try not to brake nuthin
Posted by Quick 88LX (Member # 1950) on
:
Unbolt the transmission from the trans-member too!
Posted by Curt (Member # 6254) on
:
be careful of the drain plug, don't let the board sit on it or it will bend into the pan
Posted by Curt (Member # 6254) on
:
oh yeah, and be careful of those little hard plastic vac lines, they are sometimes really brittle and could break, they are behind the intake
Posted by adower (Member # 5955) on
:
quote:
Originally posted by Curt:
oh yeah, and be careful of those little hard plastic vac lines, they are sometimes really brittle and could break, they are behind the intake
Hah yep...I broke some of those before. They are like pasta. Too far and snap.
Fueled by Ford Mustang Owners
on CaliforniaFords.com