This is topic Nitrous Help?! in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=011609

Posted by 1CLeeN5.0 (Member # 2124) on :
 
Current set-up, all the bolt-ons full off-road exhaust. spintech, e-303 cam with upgraded valve-train, no porting just spings,rods,rockers and lifters, gearing is 3.73 w/ auburn posi and 100 shot n20. the question i have is what pre-cautions should i take. like blow-down tube, bottle blanket. i just want to know how to keep the n20 efficient. thanks
 
Posted by TRIXSNK (Member # 2844) on :
 
Saftey in what aspect? Being safe/legal at a track vs. safe as in not blowing the car up safe?

-1 step colder plug
-1-2* degrees retard on timing
-91 oct
-fuel press safety switch
-rpm window or activated switch
-bottle heater/gauge
-purge kit
-blow-down tube

That should get you started and be very safe to use.

Are you running any sort of chip?
 
Posted by 66 AC COBRA (Member # 904) on :
 
here is my take on it from your list, but im dumb anyway [Big Grin]

-1 step colder plug, very good idea
-1-2* degrees retard on timing, dpending on where his timing is set right now
-91 oct - is a must on the juice
-fuel press safety switch, good to have but not needed in a low hp ap like this where the fuel pump isnt being taxed, now if u have stock pump, replace it now with a higher volume unit
-rpm window or activated switch, makes it safer, basically is keeps you in check from wanting to hit it off idle or rev it to 8500rpm
-bottle heater/gauge, very good to have to get the most out of a bottle on a cold night
-purge kit - not needed
-blow-down tube - needed at the track but not a bad idea on any car that sits in the sun
 
Posted by TRIXSNK (Member # 2844) on :
 
quote:
Originally posted by 66 AC COBRA:
here is my take on it from your list, but im dumb anyway [Big Grin]

-1 step colder plug, very good idea
-1-2* degrees retard on timing, dpending on where his timing is set right now
-91 oct - is a must on the juice
-fuel press safety switch, good to have but not needed in a low hp ap like this where the fuel pump isnt being taxed, now if u have stock pump, replace it now with a higher volume unit
-rpm window or activated switch, makes it safer, basically is keeps you in check from wanting to hit it off idle or rev it to 8500rpm
-bottle heater/gauge, very good to have to get the most out of a bottle on a cold night
-purge kit - not needed
-blow-down tube - needed at the track but not a bad idea on any car that sits in the sun

Yes i agree with the "king"
[Big Grin]

My experience with the juice is a bit dated.....a safe system i'm sure can be had for less money and added euipment.

I'm not sure about the most current set-ups but i would tend to think a purge kit may be useful espcially at the track [Confused] [burnout]
 
Posted by 9cobra9 (Member # 4470) on :
 
if its an NX kit i dont think you need to do timeing. it says not to [Confused]
 
Posted by twstd5.4 (Member # 1981) on :
 
I didn't retard my timing with a 100 shot but will when I go to 150...just to be on the safe side. That's with about 100 octane in there too.
 
Posted by underconstructionlx (Member # 5514) on :
 
i run a 175shot on my stock block with autolite 24 spark plugs and i set my timing 6 degrees and a 255 fuel pump 24 puond injectors and oh boy [burnout] iam out on those ls1 and some vettes an my boys stock 03 cobra [burnout]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com