This is topic cam ? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010685
Posted by Blue97GT (Member # 4241) on
:
well when i was at alteredspeed gettin my dyno done John (owner) said that i should go with some cams and longtubes....only prob is i only have enough for one of the mods right now! lol...
i want cams...and they said theyd get me some and install them for $$750 out the door! is this a good price??
Or should i just go with some longtubes and have them install them?? i didnt ask how much for the longtubes though..
Posted by 9Roush8 (Member # 2472) on
:
$750 is what they typically charge to install a cam in mod motors!! i think you may of misunderstood him if he is going to get you the cams and install. cams alone are $600 not including the 600-750 for install.
Posted by 03SVTPower (Member # 518) on
:
Are you not worried about smog if you go with longtubes? I think either way you go, if you can only do one of the mods, they both should be about equal in HP im guessing.
Posted by 93PONY (Member # 60) on
:
I'd wait if I were you.
Reground cams will not make much gains on an N/A motor. Billets like the Comp line won't make huge gains on stock heads....
What I'd do is save up for some Patriot CNC heads & cams ($1800 total) & slap on some longtubes at that time. With an off-road exhaust, these heads/cams, & a stock PI intake you'll be real close to 300RWHP...if not over.
Posted by Blue97GT (Member # 4241) on
:
so...those numbers do sound nice.
ill have to look into that stuff..i would like the patriot heads tho..
Fueled by Ford Mustang Owners
on CaliforniaFords.com