This is topic My car is shaking like a mother fuc*er in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=000722

Posted by Platinum Pony (Member # 970) on :
 
anybody know why it could be shaking?? it feels like the engine is running really really ruff but i honestly have know idea. and when i punch it i can barely hold the stick it shakes so bad. somebody help me! i dont know what to do
 
Posted by Blu50Stang (Member # 489) on :
 
Runnin on all 8?
 
Posted by Platinum Pony (Member # 970) on :
 
i think soo....i couldnt be 100% positive though
 
Posted by gR40coupe (Member # 698) on :
 
check park plug wires make sure none are fried
 
Posted by DjJoOnie (Member # 378) on :
 
could be in this 3 things,
spark plugs, spark plug wires, disconected fuel injecter.
 
Posted by cobraman_1994 (Member # 467) on :
 
check the plugs first. i had the same problem...
and thats what it was [Roll Eyes]
 
Posted by 93PONY (Member # 60) on :
 
Check your harmonic balancer, make sure it hasn't spun.
 
Posted by v8302stangs (Member # 530) on :
 
quote:
Originally posted by 93PONY:
Check your harmonic balancer, make sure it hasn't spun.

Yeah that's what I was going to say. Had the same problem.
 
Posted by Platinum Pony (Member # 970) on :
 
where is the harmonic balancer? i cant find it in my repair book...is it called sometihng else?
 
Posted by TORQUEPIMP (Member # 386) on :
 
quote:
Originally posted by Platinum Pony:
where is the harmonic balancer? i cant find it in my repair book...is it called sometihng else?

Crank pully.
 
Posted by the50ho (Member # 73) on :
 
Seriously check out the harmonic balancer....you will not like waht happens if it comes apart....I had this problem and needless to say it caused a bit of damage. Easy as hell to change and not very expensive for a new one. Hell if you must replace it, go with a nice fluidampr or something.

Jack
 
Posted by roseville5oh (Member # 406) on :
 
quote:
Originally posted by the50ho:
Seriously check out the harmonic balancer....you will not like waht happens if it comes apart....I had this problem and needless to say it caused a bit of damage. Easy as hell to change and not very expensive for a new one. Hell if you must replace it, go with a nice fluidampr or something.

Jack

This sounds like me back in october... Yeah, Jack remembers. Shaking got progressively worse. On afternoon, sitting in a drive thru, shut the car off so the people could hear, fired it back up and it felt like the car was going to rip itself apart. Got home, check the balancer and it had separated from the main body. Ordered a fluidampr and i couldn't have been happier. Basically, get under the car and see if you can spin the main weight of the balancer. (pictured below, sorry about the focus)


 
Posted by MRBiggs (Member # 513) on :
 
That's a tell tale sign of a harmonic balancer gone really bad !!!

DO NOT PUNCH THE CAR UNTIL YOU REPLACE IT. In fact, park it until you replace it. You can snap the crank right in half.

Go with a Romac if you can get one local and have the 200+ bucks to buy it. If you need something for right now get a stock replacement from Autozone or Pep Boys. About 100 bucks.
I just replaced mine 2 weeks ago and even though mine never got as bad as your I know what they feel like when they go south.

Seriously, you don't want to delay replacing that unless you are looking to buy a whole new engine. Remember, that's ALL NEW, not rebuilding your stocker. If that crank snaps, it won't be pretty...
Go onto the Corral site and do a search for Harmonic balancers. There is a lot of info on how to install them too because this has been a very popular subject lately. There is also some pics of broken cranks that you can use as motivation. Good luck....
 
Posted by Platinum Pony (Member # 970) on :
 
how can i tell if its bad or good?
 
Posted by 93PONY (Member # 60) on :
 
There's 2 rings, an outer & an iner, conected by by rubber. If you can grab the outer ring & move it, it's bad.
 
Posted by Platinum Pony (Member # 970) on :
 
ok
i thnk that i get it...dammit i changed the spark plugs the cap and rotor and the wires hopeing it was that...it wasnt so well see
 
Posted by sic91sleeper (Member # 779) on :
 
Check to make sure all of your spark plug wires are on the spark plugs all the way and make sure they are all hooked up to the right cylinders. Check a chiltons manual to double check your work.
 
Posted by Platinum Pony (Member # 970) on :
 
all looks good but its still shakin...were probably going to take it to ford today and get it checked
 
Posted by MRBiggs (Member # 513) on :
 
quote:
Originally posted by Platinum Pony:
all looks good but its still shakin...were probably going to take it to ford today and get it checked

If you can feel the rubber slipping out of the back of the balancer... Its a goner.
If your car has about 100k on it, its probably needing to be replaced.
If you take it to Ford to have it checked,don't let them do it if its the balancer.....

Unless you like being bent over and ass-raped.

I'm sure you can find somebody on here that will do it cheap or help you do it yourself.
 
Posted by Platinum Pony (Member # 970) on :
 
well i found it the harmonic balencer went to shit...not to mention grinding away at a mettal part next to it. pulled it out the rubber was in 1/2 peice so. thanks you guys big help saved me a trip to the doc [Smile]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com