This is topic Another Coyote Notch Project in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=062461

---

Posted by VADEl2 (Member # 10332) on :
 
Well just want to share some progress on this build. I finished the 99 single turbo cobra project. Car ran like a champ but wasn't setup for drag racing, so I parted it out and decided to do a coyote swap since all the LS swap spots were taken lol.



Here is a few pics of my progress.
Setup consists of the following
TT setup
E85 Fore Level 4 system with twin 465 pumps
Team Z rear suspension
MM front coil overs, K-member suspension setup.
Built 4R70W with Circle D converter 3400 stall.
I won't list everything else but **** more mods to list.






 

---

Posted by VADEl2 (Member # 10332) on :
 









[/URL[URL=https://imageshack.com/i/idZVwdX5j]


 

---

Posted by totalkaos92 (Member # 5750) on :
 
Nice setup. Hope to start actually start my coyote swap in the months to come
 

---

Posted by i (Member # 12534) on :
 
Real nice
 

---

Posted by moeofit32 (Member # 10393) on :
 
niiiice
 

---

Posted by SIC9250 (Member # 8216) on :
 
Badass notch you got yourself sick build
 

---

Posted by 68dustin (Member # 5388) on :
 
nice build..
 

---

Posted by 1NastyBullitt (Member # 12588) on :
 
Clean project
 

---

Posted by VADEl2 (Member # 10332) on :
 
Thanks only a few more things I'm waiting on before we can get this to the shop so we can have the TT finished.
 

---

Posted by i (Member # 12534) on :
 
Get herrrrt done!
 

---

Posted by Bottle Fed (Member # 2686) on :
 
Looks great...been following a lot of these threads, how hard is the actual wiring..??
 

---

Posted by POWERED BY FORD (Member # 9204) on :
 

quote:

---

Originally posted by Bottle Fed:
Looks great...been following a lot of these threads, how hard is the actual wiring..??

---

quote:

---

Originally posted by POWERED BY FORD:

quote:

---

Originally posted by Bottle Fed:
Looks great...been following a lot of these threads, how hard is the actual wiring..??

---

I have the same question

---

I'm not to the wiring yet but will take photos once I do. From what I've found it's pretty simple. my gauges make it easier to get the cluster to work. But the power pack that you use is pretty simple. More to come once I get more information and photos.
 

---

Posted by VADEl2 (Member # 10332) on :
 
just got to part of the wiring very easy. The harness is pretty much labeled. It's almost plug and play.
 

---

Posted by SmokinLX (Member # 1684) on :
 
Nice setup! Any target horsepower & track times that You are shooting for?
 

---

Posted by TEXAS (Member # 11875) on :
 
Nice project, I see you installed some Aerocatch hood pins, what model did you go with and how was the install? Are you happy with them?
 

---

Posted by STREETFIGHTER50 (Member # 2973) on :
 
This is gonna be sick!
 

---

Posted by VADEl2 (Member # 10332) on :
 
[QUOTE]Originally posted by TEXAS:
Nice project, I see you installed some Aerocatch hood pins, what model did you go with and how was the install? Are you happy with them? [/QUOTEhttp://www.amazon.com/gp/product/B006F441SW?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s00

pretty simple install you just have to make sure you do't screw up your hood But they work great.
 

---

Posted by TEXAS (Member # 11875) on :
 

quote:

---

Originally posted by VADEl2:
[QUOTE]Originally posted by TEXAS:
Nice project, I see you installed some Aerocatch hood pins, what model did you go with and how was the install? Are you happy with them? [/QUOTEhttp://www.amazon.com/gp/product/B006F441SW?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s00

pretty simple install you just have to make sure you do't screw up your hood But they work great.

---

quote:

---

Originally posted by TEXAS:

quote:

---

Originally posted by VADEl2:
[QUOTE]Originally posted by TEXAS:
Nice project, I see you installed some Aerocatch hood pins, what model did you go with and how was the install? Are you happy with them? [/QUOTEhttp://www.amazon.com/gp/product/B006F441SW?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s00

pretty simple install you just have to make sure you do't screw up your hood But they work great.

---

Do you have any pictures of the underside of the hood? Dis you use the Password JDM mounting plates?

---

no I didn't and I have to fix some areas that are under the hood.
 

---

Posted by VADEl2 (Member # 10332) on :
 






updated almost there!!

[ 2015-11-19, 07:59 PM: Message edited by: VADEl2 ]
 

---

Posted by i (Member # 12534) on :
 

quote:

---

Originally posted by i:
Get herrrrt done!

---

 

---

Posted by Built88LX (Member # 10758) on :
 
That's gonna be badass how wide are the rear wheels those are nice!!!
 

---

Posted by VADEl2 (Member # 10332) on :
 

quote:

---

Originally posted by Built88LX:
That's gonna be badass how wide are the rear wheels those are nice!!!

---

They are only 18x9 but I'll be running some 15x10.5 as well.
 

---

Posted by NEIGHT (Member # 8741) on :
 
Man I need to be in your line of work! I love high powered builds especially when they contain coyote swaps! Good to see CAFords members building nice cars, keep it up.
 

---

Posted by VADEl2 (Member # 10332) on :
 
Merry Christmas peeps some updated progress pics we are almost there.




 

---

Posted by iceman302 (Member # 7180) on :
 
Very impressive build!
 

---

Posted by 70stang351w (Member # 9948) on :
 
thats sick
 

---

Posted by VADEl2 (Member # 10332) on :
 

quote:

---

Originally posted by iceman302:
Very impressive build!

---

quote:

---

Originally posted by 50 Deep:
Glad to see it running brother!!

---