This is topic No Ac help... in forum General Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=060911

---

Posted by KARATExxCHUCK (Member # 12851) on :
 
So my AC stopped working a while ago. When I turn on the AC I hear the clutch kick on and the engine idles down, but I don't feel any air coming from the vents. This is the same with my heater. I turn the heater on and nothing comes from the vents. What is going on with my AC/heater?

Please help.

Thanks in Advance Guys,

Charles
 

---

Posted by MaK_1967v8 (Member # 12187) on :
 
if the pump kicks on, and you're not getting cold air. it needs to be recharged.
 

---

Posted by Blue92 (Member # 8789) on :
 

quote:

---

Originally posted by MaK_1967v8:
if the pump kicks on, and you're not getting cold air. it needs to be recharged.

---

quote:

---

Originally posted by STOCK GT:
Capacitor,motor,circuit board,clogged filter,clogged evap coil just to name a few.

---

quote:

---

Originally posted by 90 7up lx:
I know ur issue....blend door actuator

---

That actually makes sense Carlos. Could it be anything else before I take the leap and buy a new one?


 

---

Posted by Adam5.0 (Member # 6995) on :
 
If no air is coming from any of the vents I would check the blower motor itself first. Apply 12 volts to the blower motor directly and see if it turns on.
 

---

Posted by Marks93 (Member # 11130) on :
 
If no air is coming out the vents, but it is coming out the defrost on top of the dash, check the vacuum line that runs along the firewall in the engine compartment from the passenger side to the vacuum tree on the drivers side. Mine broke (with a little help from me) and I had to fix it with a small piece of rubber tubing.
 

---

Posted by 90 7up lx (Member # 10304) on :
 
What he said ^^^^^^^^……

If it is a bad actuator just bypass it n plug it into vacum and it should start blowing threw the vents....now if yo ac system has a leak then it will not blow cold
 

---

Posted by KARATExxCHUCK (Member # 12851) on :
 
If my memory serves me correctly, it use to come out of the top vents and the front vents. Then, it stopped coming out all together hot or cold...

I'm going to.check the lines tomorrow and see what happens. I'll update you guys.

Thank You!!
 

---

Posted by KARATExxCHUCK (Member # 12851) on :
 
I checked the vacuum line and it appears to be ok.

Where is the actuator and blower located?

[ 2014-06-23, 02:23 PM: Message edited by: KARATExxCHUCK ]
 

---

Posted by 93 5.0 (Member # 12418) on :
 
Pull your glove box down and see it your lines and plug in there with be 5 diff color I believe happen to me
 

---