|
Author
|
Topic: T-5 problem
|
Billy Bob
¯
Member # 9412
|
posted
 
 
I'm having trouble with my t5 going into gear. I change the clutch and the bearing retainer. But once I turn it on the car will not go into gear at all, if the car is off it goes into the gears very smooth. What could be the problem?
--------------------
JACK SWAG
Posts: 293 | From: Your chicks house | Registered: Aug 2009
| :
|
|
Martinna
¯
Member # 12493
|
posted
Do you have an adjustable cable? Try tightening the cable so the clutch doesn't grab so close to the floor.
Posts: 1093 | From: City | Registered: Oct 2012
| :
|
|
Billy Bob
¯
Member # 9412
|
posted
quote:
Originally posted by Martinna:
Do you have an adjustable cable? Try tightening the cable so the clutch doesn't grab so close to the floor.
I will try that thanks
--------------------
JACK SWAG
Posts: 293 | From: Your chicks house | Registered: Aug 2009
| :
|
|
i
¯
Member # 12534
|
posted
Did you put the clutch bearing on correctly that is attached with the clutch fork?
--------------------
86 Caged Coupe 5.0
91 Salvaged Coupe
Posts: 1901 | From: Sacramento | Registered: Nov 2012
| :
|
|
Billy Bob
¯
Member # 9412
|
posted
quote:
Originally posted by i:
Did you put the clutch bearing on correctly that is attached with the clutch fork?
Yes that is on correctly
--------------------
JACK SWAG
Posts: 293 | From: Your chicks house | Registered: Aug 2009
| :
|
|
i
¯
Member # 12534
|
posted
Can you elaborate more on why you can't shift? What happens when you hold down the clutch does it feel strong? Do you have a Short shifter equipped probably needs adjustment? Do you have an after market clutch quadrant or clutch cable that is adjustable that needs adjustment?
--------------------
86 Caged Coupe 5.0
91 Salvaged Coupe
Posts: 1901 | From: Sacramento | Registered: Nov 2012
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
