Author
|
Topic: Car won't start
|
SC363SN
¯
Member # 13850
|
posted
Hey cafords, I'm having problems with my car starting. It's a sn95 hci with a 78mm turbo. Car did run a bit rich but, was good untill about a week ago. I checked for spark, fuel pressure, timing, starter. Just about everything. All is good. I pulled the old plugs and they were full of fuel. Replaced injectors, maf, spark plugs, wires. Still no luck. My mechanic can't figure it out either. Any Ideas? Maybe the distributor? Engine has a fresh rebuild btw. I do have a spare hci 306 but, I want to keep this motor for now [ 2015-12-05, 07:04 PM: Message edited by: BuiltSaleen ]
Posts: 489 | From: Sacramento | Registered: Nov 2014
| :
|
|
92_5.0
¯
Member # 7624
|
posted
Coil? ignition module?
-------------------- Infineon/Sears point? same difference! 11.8 @ 115 mph @ Sac Raceway 411 rwhp 402 trq (old set up) 540 rwhp 517 rwtrq (new set up) ET's to come
Posts: 1629 | From: bay area | Registered: May 2007
| :
|
|
SmokinLX
¯
Member # 1684
|
posted
Do a search on it there is a detailed write up from a few years ago that cover's A-Z
-------------------- Dont claim power if ya cant mile per hour. 10 second AOD
Posts: 4388 | From: East Bay | Registered: Aug 2002
| :
|
|
SC363SN
¯
Member # 13850
|
posted
Turned out to be a small air leak at the maf and maf was no good. Car runs great now, thanks for the advice cafords!
Posts: 489 | From: Sacramento | Registered: Nov 2014
| :
|
|
|