Author
|
Topic: Roller vs flat tappet heads?
|
70stang351w
¯
Member # 9948
|
posted
I've been looking in to getting some heads for my 351w in the next year and noticed most used heads say setup for Roller which my 70 block is not what would need to be changed on the heads to run on non roller block
thanks
-------------------- 1996 GT VERT /32v MOD - SOLD 1970 Mustang Coupe M-Code 351w
Posts: 1419 | From: 925 | Registered: Apr 2010
| :
|
|
1fastmach1
¯
Member # 10137
|
posted
I believe just the springs need to be changed for a non roller cam
-------------------- REDLINE MOTORSPORTS CC EST 2011 1993 CHP sold 2004 mach 1 408 Windsor n20 fed R.I.P. JORGE GUTIERREZ JR 6/13/1982- 11/05/2013
Posts: 2592 | From: clawwwitter to 7th st | Registered: Jul 2010
| :
|
|
hurting your feelings
¯
Member # 13641
|
posted
quote: Originally posted by 1fastmach1: I believe just the springs need to be changed for a non roller cam
^^^that's correct^^^
Posts: 1830 | From: In front of the bank with a 45 an a ski mask | Registered: Jun 2014
| :
|
|
Built88LX
¯
Member # 10758
|
posted
quote: Originally posted by 1fastmach1: I believe just the springs need to be changed for a non roller cam
I believe you need flat tappet lifters also don't think roller lifters will work with that cam
Posts: 2390 | From: $acramento | Registered: Mar 2011
| :
|
|
hurting your feelings
¯
Member # 13641
|
posted
quote: Originally posted by Built88LX: quote: Originally posted by 1fastmach1: I believe just the springs need to be changed for a non roller cam
I believe you need flat tappet lifters also don't think roller lifters will work with that cam
His car has flat tappet cam already.
Posts: 1830 | From: In front of the bank with a 45 an a ski mask | Registered: Jun 2014
| :
|
|
70stang351w
¯
Member # 9948
|
posted
Thanks for the responses. will look in to what springs are currently on the stock heads(car in storage)
And the cam is a flat tappet Edelbrock cam not sure which one probably the performer cam,
Where on the cam would the specs/Part# be?
-------------------- 1996 GT VERT /32v MOD - SOLD 1970 Mustang Coupe M-Code 351w
Posts: 1419 | From: 925 | Registered: Apr 2010
| :
|
|
hurting your feelings
¯
Member # 13641
|
posted
quote: Originally posted by 70stang351w: Thanks for the responses. will look in to what springs are currently on the stock heads(car in storage)
And the cam is a flat tappet Edelbrock cam not sure which one probably the performer cam,
Where on the cam would the specs/Part# be?
The numbers would be on the cam it's self. An get new springs that are correct for the heads. An any good machine shop can measure your old springs an tell what the pressure they are.
Posts: 1830 | From: In front of the bank with a 45 an a ski mask | Registered: Jun 2014
| :
|
|