Author
|
Topic: 2003 Centerforce Clutch with Fidanza flywheel
|
03Terminator
¯
Member # 9241
|
posted
I have a 2003 Cobra and recently installed a Centerforce dual friction clutch with a Fidanza flywheel. I have a firewall adjuster setup as well.
When I drove it initially I noticed some chattering especially in 1st, 2nd, and 3rd gear. I then noticed when I was on the freeway it was fine and then when getting off the freeway and driving on the street the chatter started going away. Then driving later that same day mainly on the street, it began to chatter more and more to the point where the pedal would shake even at idle.
Any ideas of what could be the problem? Thanks.
-------------------- 03Terminator
Posts: 84 | From: San Leandro | Registered: Jun 2009
| :
|
|
92_5.0
¯
Member # 7624
|
posted
I know my Spec stage 3 chattered when I first installed it, so instead of letting it chatter I would just rev a little high and let the tires spin a bit. Maybe try re-adjusting?
-------------------- Infineon/Sears point? same difference! 11.8 @ 115 mph @ Sac Raceway 411 rwhp 402 trq (old set up) 540 rwhp 517 rwtrq (new set up) ET's to come
Posts: 1629 | From: bay area | Registered: May 2007
| :
|
|
4 CAM FOX
¯
Member # 11891
|
posted
Is everything new?
-------------------- "The clutch is on the left. Gas on the right." "What's this one in the middle?" "It's for pussies."
Posts: 1798 | From: NOR*CAL | Registered: Apr 2012
| :
|
|
03Terminator
¯
Member # 9241
|
posted
The clutch, flywheel, throwout bearing, pilot bearing are all new.
-------------------- 03Terminator
Posts: 84 | From: San Leandro | Registered: Jun 2009
| :
|
|