|
Author
|
Topic: Tran / driveline prob
|
93 5.0
¯
Member # 12418
|
posted
 
 
My brothe has a 94 5.0 5speed and we want and got a diff tran and now the car shakes @3 grand and the drive line about 1/2in shorter ( like where the mark was from the old tran ) and a new clutch kit
Any ideas ???
Posts: 230 | From: 209 | Registered: Sep 2012
| :
|
|
redvenom
¯
Member # 12651
|
posted
Get the drive line ballance
--------------------
1990 Gt
Some what stock
1993 GT vert-(stolen)
Posts: 623 | From: cali | Registered: Dec 2012
| :
|
|
93 5.0
¯
Member # 12418
|
posted
But it only shakes under a load
Posts: 230 | From: 209 | Registered: Sep 2012
| :
|
|
norcalfiddy
¯
Member # 11207
|
posted
did he put a 87-93 t5 in it?
--------------------
600HP 1996 7.3L powerstroke single cab short bed race truck
Posts: 3393 | From: Brentwood | Registered: Aug 2011
| :
|
|
93 5.0
¯
Member # 12418
|
posted
It came out of a 94 we got the trans from pick& pull
Posts: 230 | From: 209 | Registered: Sep 2012
| :
|
|
egress
¯
Member # 13128
|
posted
You need the SN95 bellhousing if you're going to use that. Or change the input shaft in the T5 so it works with the Fox bellhousing
Edit: nvm i thought you swapped it into a fox.
[ 2014-02-09, 11:20 PM: Message edited by: egress ]
Posts: 286 | From: Oakland, CA | Registered: Aug 2013
| :
|
|
rollininmy50
¯
Member # 9067
|
posted
If you pic n pulled it, the guy who dumped it there probably had that issue, and if it's a shorter t5 then yes may have come from a fox. B sure your old bell housing and the one installed look the same, either way if you had no vibration before the old one crapped out, then your used one is garbage, go find another or get store credit. Wise man say if nothing shook before when broken, then new stuff is the problem.
Posts: 439 | From: sactown | Registered: Apr 2009
| :
|
|
93 5.0
¯
Member # 12418
|
posted
The tran was just rebuilt cuz we pulled the plug and the fluid look new and had new rtv and the car was a STOLo
Posts: 230 | From: 209 | Registered: Sep 2012
| :
|
|
egress
¯
Member # 13128
|
posted
Pic N Pull or Stolo ? Wat. ![[Eek!]](eek.gif)
Posts: 286 | From: Oakland, CA | Registered: Aug 2013
| :
|
|
93 5.0
¯
Member # 12418
|
posted
It was at pick and pull but the the was stolen cuz the door lock was f up and the ing was bang out and had Mpd on the front window
Posts: 230 | From: 209 | Registered: Sep 2012
| :
|
|
egress
¯
Member # 13128
|
posted
So what from the car did you swap over? Trans only?
Posts: 286 | From: Oakland, CA | Registered: Aug 2013
| :
|
|
93 5.0
¯
Member # 12418
|
posted
Ya we change just the tran cuz his old one had no 2d or 3rd gear and we took it to a shop and they said the h/b was bad and the clutch is new but they said I mite be put in wrong
Posts: 230 | From: 209 | Registered: Sep 2012
| :
|
|
egress
¯
Member # 13128
|
posted
Does sound like the harmonic balancer is bad though. Hope you /they figure it out. ![[patriot]](graemlins/patriot.gif)
Posts: 286 | From: Oakland, CA | Registered: Aug 2013
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
