Author
|
Topic: e-85 13:1 or 14:1 compression
|
1fastmach1
¯
Member # 10137
|
posted
going e-85 what the most compression you can run with nitrous with out detonating wanna run 14:1 with a 150 shot direct port will I run into detonation or should I go 13:1 or 13:5:1
thanks, brett [ 2013-08-04, 10:35 AM: Message edited by: 79 cobra ]
-------------------- REDLINE MOTORSPORTS CC EST 2011 1993 CHP sold 2004 mach 1 408 Windsor n20 fed R.I.P. JORGE GUTIERREZ JR 6/13/1982- 11/05/2013
Posts: 2592 | From: clawwwitter to 7th st | Registered: Jul 2010
| :
|
|
5.0 LsX
¯
Member # 10017
|
posted
wouldn't go much past 13:1, the gains start to diminish past that point. as long as your tune is spot on, you wont have to worry about detonation
-------------------- 91' Notch
Posts: 1260 | Registered: May 2010
| :
|
|
1fastmach1
¯
Member # 10137
|
posted
ordered my pistons from je there dome +10cc so with my 72cc heads puts me at 11;7 but if I mill my heads down to 60cc I will be at 13;4 or should mill them down to 58cc and be at 14;1 kinda lost gonna be sprayin just a 150 shot any help will be greatly appreciated
thanks, brett [ 2013-08-04, 09:15 AM: Message edited by: 79 cobra ]
-------------------- REDLINE MOTORSPORTS CC EST 2011 1993 CHP sold 2004 mach 1 408 Windsor n20 fed R.I.P. JORGE GUTIERREZ JR 6/13/1982- 11/05/2013
Posts: 2592 | From: clawwwitter to 7th st | Registered: Jul 2010
| :
|
|
warhorse58gt
¯
Member # 7702
|
posted
You could do 14:1. How fast are you tryig to go. Because in the realm of 14:1 and 434 cubes you looking at high 800hp on motor alone.
-------------------- WOLFPACK RACING
With guns, we are 'citizens'. Without them, we are 'subjects'.
83gt 354ci sbf 9.40 @ 143 77 cobra 2 171ci 97hp of pure fury!
Posts: 4200 | From: 209 | Registered: Jun 2007
| :
|
|
1fastmach1
¯
Member # 10137
|
posted
going on a 408 stroker looking for high 500 low 600 all motor and on bottle around 800 to 900 the block is a69 so it should hold up hopfully [ 2013-08-04, 09:54 AM: Message edited by: 79 cobra ]
-------------------- REDLINE MOTORSPORTS CC EST 2011 1993 CHP sold 2004 mach 1 408 Windsor n20 fed R.I.P. JORGE GUTIERREZ JR 6/13/1982- 11/05/2013
Posts: 2592 | From: clawwwitter to 7th st | Registered: Jul 2010
| :
|
|
Cafoxbody
¯
Member # 11267
|
posted
quote: Originally posted by 79 cobra: going on a 408 stroker looking for high 500 low 600 all motor and on bottle around 800 to 900 the block is a69 so it should hold up hopfully
Good luck with that... a 351 block will snap just as easy as a 302 block with that sort of power.
Posts: 207 | From: Bay | Registered: Sep 2011
| :
|
|