|
Author
|
Topic: head gasket or head stud leak?
|
|
|
Greasy
¯
Member # 5258
|
posted
 
 
I click on the link and it says "Download Failed"
--------------------
'93 Cobra-Coyote Powered
'03 DSG Cobra
'13 Dodge Cummins
'14 Rubicon X
Posts: 3272 | From: North Dallas | Registered: Jan 2005
| :
|
|
moeofit32
¯
Member # 10393
|
posted
damnit let me try something else
--------------------
95 stroked and blown cobra
Posts: 2387 | From: antioch ca | Registered: Oct 2010
| :
|
|
MACK.GT
¯
Member # 10461
|
posted
I.was able to.see clip. Based.on what i saw, id.say its The.gasket. Either way ,once you take it apart to inspect,youll need New head gaskets. But The reason why they leaked , my guess would be some warpage thats out Of spec. Did you measure those heads.with a straight edge. And feeler gauges? Some sort Of installation error may be The cause.id go back check.my steps, best Of luck....
Posts: 446 | From: 510 | Registered: Nov 2010
| :
|
|
moeofit32
¯
Member # 10393
|
posted
i had the head checked and milled by a local shop....i uploaded a new video
[ 2013-05-26, 03:50 PM: Message edited by: moeofit32 ]
--------------------
95 stroked and blown cobra
Posts: 2387 | From: antioch ca | Registered: Oct 2010
| :
|
|
MACK.GT
¯
Member # 10461
|
posted
Thats Good, one less thing. Now on those studs, do they require any kind Of teflon tape Or other sealant like hylomar? K Im just trying to figure how they might leak From The studs.
Posts: 446 | From: 510 | Registered: Nov 2010
| :
|
|
moeofit32
¯
Member # 10393
|
posted
i was told u should use some form of sealant and i believe it was used motor been together for a year and just started leaking while i was doing a k member on my stang....st8 out of nowhere
--------------------
95 stroked and blown cobra
Posts: 2387 | From: antioch ca | Registered: Oct 2010
| :
|
|
turbo50
¯
Member # 6700
|
posted
Sleeze the stud out put sealant on it and stick it back in.
--------------------
.........when was the last time YOU built something with YOUR own hands?
I offer quality sidework at reasonable prices. PM ME
Posts: 7606 | From: Discovery Bay, California | Registered: Apr 2006
| :
|
|
moeofit32
¯
Member # 10393
|
posted
how many pounds of pressure on the stud when torqued back down
[ 2013-05-26, 04:41 PM: Message edited by: moeofit32 ]
--------------------
95 stroked and blown cobra
Posts: 2387 | From: antioch ca | Registered: Oct 2010
| :
|
|
moeofit32
¯
Member # 10393
|
posted
thanks guys i found the problem its actually running from my upper intake and dripping down
--------------------
95 stroked and blown cobra
Posts: 2387 | From: antioch ca | Registered: Oct 2010
| :
|
|
CobraCoupe
¯
Member # 7233
|
posted
Just curious what intake gaskets did you use? Are they felpro 1250?
Posts: 663 | From: Hayward | Registered: Nov 2006
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
