|
Author
|
Topic: best way to cut fender?
|
OneFastHatch.
¯
Member # 9537
|
posted
 
 
For mounting fender cold air. I re did my engine bay
--------------------
1991 fobra (slow)
Posts: 2139 | From: bay area | Registered: Oct 2009
| :
|
|
4 CAM FOX
¯
Member # 11891
|
posted
Air saw if you have a steady hand. Hole saw if its on a decently flat surface.
--------------------
"The clutch is on the left. Gas on the right."
"What's this one in the middle?"
"It's for pussies."
Posts: 1798 | From: NOR*CAL | Registered: Apr 2012
| :
|
|
lxhatch5.0
¯
Member # 6319
|
posted
mock up a piece of the hole you want to cutt with a piece of cardboard from one of yours friends 5.0 that actually has a fenderwell intake and use it to cutt around ![[burnout]](graemlins/burnout.gif)
--------------------
*NorCal
Posts: 1556 | Registered: Dec 2005
| :
|
|
OneFastHatch.
¯
Member # 9537
|
posted
quote:
Originally posted by lxhatch5.0:
mock up a piece of the hole you want to cutt with a piece of cardboard from one of yours friends 5.0 that actually has a fenderwell intake and use it to cutt around
I might do this ![[Smile]](smile.gif) thx ![[patriot]](graemlins/patriot.gif)
--------------------
1991 fobra (slow)
Posts: 2139 | From: bay area | Registered: Oct 2009
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
