|
Author
|
Topic: clutch problem
|
85staNg302
¯
Member # 9450
|
posted
 
 
Ok well not sure what it is but car was driving fine till I engage in the clutch then felt like the clutch cable snapped or stretched (clutch petal with a lot of play) so I replace clutch cable and the clutch cable is hella stiff if not to lose it I adjust the fire wall adjuster and won't let the gear go in at all. The clamp thing that holds the bottom clutch cable adjustment has a lot of play also not sure if it supposed too..clutch out?
Posts: 1561 | From: sacramento | Registered: Sep 2009
| :
|
|
90 7up lx
¯
Member # 10304
|
posted
WHAT CABLE DID U REPLACE IT WITH. AND DO U GOT AN AFTERMARKET QUADRANT
Posts: 1266 | From: north valley | Registered: Sep 2010
| :
|
|
88FOX
¯
Member # 9969
|
posted
If you replaced the quad you need to get an aftermarket adjustable cable.. the bottom of the cable should have a long threaded end and come with two bolts.. from there you can fine tune the adjustment.
Posts: 1938 | From: bay area | Registered: Apr 2010
| :
|
|
85staNg302
¯
Member # 9450
|
posted
Thanks found the problem. The tranny shaft was gone ..took it to the tranny shop and should get it in a couple days.
Posts: 1561 | From: sacramento | Registered: Sep 2009
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
