|
Author
|
Topic: cobra calipers on 94/95 spindle... direct bolt on?
|
1sick65
¯
Member # 3957
|
posted
 
 
does the spindle require anything extra to accomodate the cobra calipers?
Posts: 1457 | From: Sacramento,CA | Registered: Jan 2004
| :
|
|
ratfast
¯
Member # 8720
|
posted
There is a bracket that spaces the caliper out to run the 13" rotors. Most remanufactured calipers for the Cobras come with it in the box. I used to have a couple sets, let me know if you need them.
--------------------
'93 White notch all stock
Posts: 604 | From: roseville, california | Registered: Oct 2008
| :
|
|
MUSTTANGUY
¯
Member # 2251
|
posted
All of the 13" Cobra/Mach1/Bullitt calipers will bolt right up to the 94/95 spindles.
Only the 99-04 11" GT/V6 aluminum dual piston PBR caliper requires some clearancing to the arch.
I have refurbished 94/95 spindles available if needed
--------------------
Tim (Musttanguy)
97 5.0 coupe
82 GT 427/T56/9"
Posts: 1690 | From: Lodi | Registered: Dec 2002
| :
|
|
1sick65
¯
Member # 3957
|
posted
thanks guys,
i have the spindles and am getting the calipers. are the bolts needed anything special?
Posts: 1457 | From: Sacramento,CA | Registered: Jan 2004
| :
|
|
MUSTTANGUY
¯
Member # 2251
|
posted
Most of the mid-full size Fords use the same caliper bolts, Don't recall the size offhand.
You will also need a balljoint spacer if installing on Fox control arms.
I have machined ball joint spacers and caliper bolts available.
--------------------
Tim (Musttanguy)
97 5.0 coupe
82 GT 427/T56/9"
Posts: 1690 | From: Lodi | Registered: Dec 2002
| :
|
|
5.0 LsX
¯
Member # 10017
|
posted
all of the caliper bolts are the same, i would recommend pressing in sn95 ball joints
--------------------
91' Notch
Posts: 1260 | Registered: May 2010
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
