|
Author
|
Topic: 68 mustang regulator question
|
510Notch
¯
Member # 9353
|
posted
 
 
trying to install a 3g alt but i need to figure out which terminal is the "I" terminal?
(car is kind of bare and original regulator is gone, the pic is for reference/identification purposes...I dont have a regulator around with the terminal markings)
Posts: 287 | From: SF | Registered: Jul 2009
| :
|
|
v-town coupe
fordologist
Member # 2771
|
posted
if your going 3G you can toss that. if you look all the wires went back to the solenoid. when I went 3g I traced all the wires back and took the whole harness out and havent had any issues since.
Posts: 4597 | From: the V-town | Registered: May 2003
| :
|
|
v-town coupe
fordologist
Member # 2771
|
posted
my car is a 67 btw.
Posts: 4597 | From: the V-town | Registered: May 2003
| :
|
|
510Notch
¯
Member # 9353
|
posted
quote:
Originally posted by v-town coupe:
if your going 3G you can toss that. if you look all the wires went back to the solenoid. when I went 3g I traced all the wires back and took the whole harness out and havent had any issues since.
I was looking at a diagram and it says that the exciter wire from the 3g alternator plugs into the original regulator connector ("I" terminal).
where did you hook your exciter wire upto?
Posts: 287 | From: SF | Registered: Jul 2009
| :
|
|
wilit
Mustang Messiah
Member # 3367
|
posted
Look on the top side of the plug, they should be labeled. I should be on the far left.
--------------------
"If a man hasn't found something worth dying for, he isn't fit to live." - Martin Luther King Jr.
Posts: 4793 | From: 37.78514° North 122.40100° West | Registered: Oct 2003
| :
|
|
American Iron Speed Shop
¯
Member # 6311
|
posted
Also the ignition terminal on the starter solenoid should work for you too!
--------------------
AmericanIronSpeedShop.com
Posts: 435 | From: Loomis Ca (sacramento) | Registered: Dec 2005
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
