|
Author
|
Topic: pushrod question
|
85CHP510
¯
Member # 9690
|
posted
 
 
in process of rebuilding my gt40 heads, ported them and everything. e303, with 1.6 svo rockers. what size pushrods should i use?? ddefinately not stock bt not sure what size. i get all my stuff from latemodelresto.com, and they have a set of pushrods from trick flow that are 5/16 by 6.700 long. or the ones from ford racing (which im assming they are oem replacements) that are 5/16 by 6.272...suggestions on what set i should use, any difference? need something that will hold, and i wont have any problems with in the near fture thanks
Posts: 311 | From: oakland | Registered: Dec 2009
| :
|
|
1fastmach1
¯
Member # 10137
|
posted
make sure there crome moly if you want the good ones plus never kan just say what size you need you need to measure and get the correct length
--------------------
REDLINE MOTORSPORTS CC EST 2011
1993 CHP sold
2004 mach 1 408 Windsor n20 fed
R.I.P. JORGE GUTIERREZ JR
6/13/1982- 11/05/2013
Posts: 2592 | From: clawwwitter to 7th st | Registered: Jul 2010
| :
|
|
85CHP510
¯
Member # 9690
|
posted
well as far as the length, how do i determine that
Posts: 311 | From: oakland | Registered: Dec 2009
| :
|
|
Greasy
¯
Member # 5258
|
posted
quote:
Originally posted by 85CHP510:
well as far as the length, how do i determine that
You will have to get a pushrod length checker
Posts: 3272 | From: North Dallas | Registered: Jan 2005
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
