Author
|
Topic: fuel leak on rail to injectors, help
|
lscstk
¯
Member # 5788
|
posted
Hello is there anyone in stockton who is will to help me tonght as in now to fix this problem if it can be, i need to be rolling by sun up to get wife, willing to work something out for you time, please call me 2095985793, george
thanks
-------------------- 3.73 gears-MAC cover-Turbo mufs-1 5/8 header-GT40p heaeds-TFS valve kit-SVO-1.6RR-BBK cat x-pipeand CAI-Cobra Intake-65mmTB, upgraded sway bar F/R
Posts: 258 | From: stockton ca | Registered: Jun 2005
| :
|
|
lscstk
¯
Member # 5788
|
posted
from what i can tell the clip holding the fuel line into rali is missing anyone in stockton got an extra. let me know thanks
-------------------- 3.73 gears-MAC cover-Turbo mufs-1 5/8 header-GT40p heaeds-TFS valve kit-SVO-1.6RR-BBK cat x-pipeand CAI-Cobra Intake-65mmTB, upgraded sway bar F/R
Posts: 258 | From: stockton ca | Registered: Jun 2005
| :
|
|
nasty93
¯
Member # 8935
|
posted
i doubt that clip would make your fuel rail leak.make sure fuel line connections are pushed in all the way.if its leaking at the injectors where they go into fuel rail then it could be bad or not seated o- rings. they can b bought at any aouto parts store.
Posts: 464 | From: windsor ,ca | Registered: Feb 2009
| :
|
|
|
Sydewayz_Stan
¯
Member # 10217
|
posted
O rings +1
-------------------- -90 Vert-SOLD -91 Notch-SOLD -2000 Explorer 5.0-SOLD -72 Maverick-SOLD -2004 GT, vortech V2 si, 10 psi- -2002 F150 supercrew-
Posts: 3432 | From: 707 vallejo/richmond 510 | Registered: Aug 2010
| :
|
|
lscstk
¯
Member # 5788
|
posted
THANKS GUYS,there was no clip on where chrome fuel line goes into the rail at front of car on left as you face it, i got a clip from another car, the metal line was out so far i could see the o-rings, i pushed it in and attached the clip, seems to have stop, no leaks or smell of fuel, avoided a disaster this time. leaked so much fuel I had to pull out the hood insulation it was dripping with fuel.
-------------------- 3.73 gears-MAC cover-Turbo mufs-1 5/8 header-GT40p heaeds-TFS valve kit-SVO-1.6RR-BBK cat x-pipeand CAI-Cobra Intake-65mmTB, upgraded sway bar F/R
Posts: 258 | From: stockton ca | Registered: Jun 2005
| :
|
|
Sydewayz_Stan
¯
Member # 10217
|
posted
it sounds like the rail isnt bolted to the lower intake [ October 15, 2011, 08:00 PM: Message edited by: sydewayzLX50 ]
-------------------- -90 Vert-SOLD -91 Notch-SOLD -2000 Explorer 5.0-SOLD -72 Maverick-SOLD -2004 GT, vortech V2 si, 10 psi- -2002 F150 supercrew-
Posts: 3432 | From: 707 vallejo/richmond 510 | Registered: Aug 2010
| :
|
|
lscstk
¯
Member # 5788
|
posted
no it isn't i believe it is held in place by the injectors being attached to it and then the injectors to the lower manifold. look at your stock fuel rail. on the left hand side as you face it you will see the fuel rail, there is an upper line and lower line, they both have a clip that holds the adjoining metal line to it, on mines the lower line was pulled away from the fitting, it missing the clip. replaced all is good so far.
-------------------- 3.73 gears-MAC cover-Turbo mufs-1 5/8 header-GT40p heaeds-TFS valve kit-SVO-1.6RR-BBK cat x-pipeand CAI-Cobra Intake-65mmTB, upgraded sway bar F/R
Posts: 258 | From: stockton ca | Registered: Jun 2005
| :
|
|
Sydewayz_Stan
¯
Member # 10217
|
posted
oh i understand now. the way you worded it i thought you were seeing the o-rings on the injectors, not the o-rings on the chrome fuel line. glad you got it fixed
-------------------- -90 Vert-SOLD -91 Notch-SOLD -2000 Explorer 5.0-SOLD -72 Maverick-SOLD -2004 GT, vortech V2 si, 10 psi- -2002 F150 supercrew-
Posts: 3432 | From: 707 vallejo/richmond 510 | Registered: Aug 2010
| :
|
|
lscstk
¯
Member # 5788
|
posted
yes, i thought maybe i didn't explaine it very well
-------------------- 3.73 gears-MAC cover-Turbo mufs-1 5/8 header-GT40p heaeds-TFS valve kit-SVO-1.6RR-BBK cat x-pipeand CAI-Cobra Intake-65mmTB, upgraded sway bar F/R
Posts: 258 | From: stockton ca | Registered: Jun 2005
| :
|
|