Author
|
Topic: clunk
|
Saleen 00-768
¯
Member # 9379
|
posted
so on the freeway, in 5th grear, around freeway speeds, off the gas peddal, then tap the peddal semi agressive to accelerate and i hear a clunk from the rear end...
could it be gap between worn ring n pinion?
could it be u joint?
opionins appreciated
-------------------- '00 Saleen SC #768 '90 GT '90 California Edition (sold) '87 Saleen #264 (sold)
Posts: 1664 | From: NOR✯CAL | Registered: Aug 2009
| :
|
|
Blind
2.3L CAFords OG
Member # 3052
|
posted
pinion crush sleeve has collapsed most likely.
my old 4.30 geared SRA however wore the spines on the axles enough to cause a similar clunk between shifts and on/off the gas. [ October 05, 2011, 03:27 PM: Message edited by: Blind ]
-------------------- 89 LX Notchback ex 4cyl, 14psi 02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
Saleen 00-768
¯
Member # 9379
|
posted
thanks for the response blind i appreciate it.
just curious if this was a common thing to happen in foxbodys? (or maybe just the 5speed ones)?
mines the original 8.8 rear end w/ 92k btw and nothing inside it has ever been replaced, pretty sure diff cover has never even been taken off.. [ October 05, 2011, 03:46 PM: Message edited by: sneakyfox90 ]
-------------------- '00 Saleen SC #768 '90 GT '90 California Edition (sold) '87 Saleen #264 (sold)
Posts: 1664 | From: NOR✯CAL | Registered: Aug 2009
| :
|
|
89foxstang
¯
Member # 5908
|
posted
I would also check the u joints , I always like to check the easy stuff first
Posts: 825 | From: Davis | Registered: Aug 2005
| :
|
|
Blind
2.3L CAFords OG
Member # 3052
|
posted
quote: Originally posted by 89foxstang: I would also check the u joints , I always like to check the easy stuff first
naturally, it's easy to check all the related parts, just jack the rear up, leave the trans in gear, and try to move the driveshaft, then the u-joints, then the pinion flange on the front of the diff, then spin the wheels back and forth.
parts wear out.
-------------------- 89 LX Notchback ex 4cyl, 14psi 02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
trickflow211
¯
Member # 8503
|
posted
Torque arm snapped ! Problem solved !
-------------------- 1990 Cobra Clone 421 Tq 420 Hp
Need General Contractor Services? 925-338-5422 serving East Bay Area over 20yrs
Posts: 2449 | From: Pittsburg/Sacramento | Registered: Jul 2008
| :
|
|
Saleen 00-768
¯
Member # 9379
|
posted
^ lol
thanks for all the other serious answers
-------------------- '00 Saleen SC #768 '90 GT '90 California Edition (sold) '87 Saleen #264 (sold)
Posts: 1664 | From: NOR✯CAL | Registered: Aug 2009
| :
|
|