|
Author
|
Topic: what you think
|
p5.0
¯
Member # 6160
|
posted
 
 
Ok here's what I got. 306 short block , Afr 185's heads with 1.7 stud mount rockers and paxton supercharger 8 psi. It's for a carb setup. What cam should I go with ? B cam. And victor Jr intake? also were can I get a blow through carb that will work with the setup. And fuel pump which one. Thanks cafords
--------------------
RIP 91 300zx
sold 90 300zx
05 GSXR sold
94 gt 331 sold
01 lightning
03 ninja 636 sold
67 mustang coupe project
03 R1 sold
Posts: 593 | From: Sunnyvale | Registered: Oct 2005
| :
|
|
Sydewayz_Stan
¯
Member # 10217
|
posted
i would think a b-cam is kinda small for that setup. i personally cany recommend a good one for you but i think you could find something more suitable for that combo than a b-cam
--------------------
-90 Vert-SOLD
-91 Notch-SOLD
-2000 Explorer 5.0-SOLD
-72 Maverick-SOLD
-2004 GT, vortech V2 si, 10 psi-
-2002 F150 supercrew-
Posts: 3432 | From: 707 vallejo/richmond 510 | Registered: Aug 2010
| :
|
|
p5.0
¯
Member # 6160
|
posted
would a f cam be to big with the 1.7rockers. or should i go the trick flow stage 1 if the b cam is to small.
--------------------
RIP 91 300zx
sold 90 300zx
05 GSXR sold
94 gt 331 sold
01 lightning
03 ninja 636 sold
67 mustang coupe project
03 R1 sold
Posts: 593 | From: Sunnyvale | Registered: Oct 2005
| :
|
|
95gtdrop
¯
Member # 7478
|
posted
i would think an f cam would be fine, the tfs cam or just get a custom ground one from comp cams ![[patriot]](graemlins/patriot.gif)
--------------------
1997 SVT cobra SOLD;(
2004 SVT Cobra Vert
Posts: 1221 | From: sacramento | Registered: Mar 2007
| :
|
|
2BlueGeeTees
¯
Member # 4702
|
posted
Holley black fuel pump a Holley blow thru carb and if you really want a ford cam than stick with an F cam as far as the rockers make sure you check piston to valve clearance with a check spring installed. However custom cams for a pushrod are really not that much more expensivethan an OTS cam
Posts: 2316 | From: Vacaville | Registered: Jul 2004
| :
|
|
70mach351
¯
Member # 7528
|
posted
csu makes a good blow through carb, i ran a quick fuel for my last one and then coverted it to efi. Warhorse has it now and it runs like a champ. id stay away from the holley brand or demon blow though carbs. THere is a few on yellow bullet and corral right now for sale for 400 or so.
--------------------
70 Mach 1 gettin a make over
2001 Ford F250 Crew Cab 7.3
Posts: 1762 | From: EDH | Registered: Mar 2007
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
