|
Author
|
Topic: 8.8 IRS
|
Santos1986gt
¯
Member # 10513
|
posted
 
 
I have a IRS off of a 04 cobra and I also have a solide 8.8 from a 90 gt. My question is can I take the gears From the IRS into the solid with the clutches into the solid with no problems? Or do j have to add shims
--------------------
86gt minor upgrades(under construction)
2012 Focus SE (racing chip)?
_ _ _ _ _ _ _
Xgotsome4me4
Posts: 271 | From: East Palo alto | Registered: Dec 2010
| :
|
|
triple b
¯
Member # 8763
|
posted
Gear ring and pinion can be swapped
--------------------
1988 4cyl conv 306 HCI "sasha"
2004 tahoe
Sold- 87 GT, 72 chevelle, 63 biscane, 82 monte carlo, 73 nova, 88 silverado,
Posts: 1730 | From: sacramento ca | Registered: Nov 2008
| :
|
|
MUSTTANGUY
¯
Member # 2251
|
posted
04 Cobra carrier is 31 spline, stcck GT is 28 spline
Would need new axles for the solid rearend to install
Gears only (ring and pinion) will transfer, still need to have gears dialed in however.
--------------------
Tim (Musttanguy)
97 5.0 coupe
82 GT 427/T56/9"
Posts: 1690 | From: Lodi | Registered: Dec 2002
| :
|
|
Santos1986gt
¯
Member # 10513
|
posted
What car has 31 spline axles
--------------------
86gt minor upgrades(under construction)
2012 Focus SE (racing chip)?
_ _ _ _ _ _ _
Xgotsome4me4
Posts: 271 | From: East Palo alto | Registered: Dec 2010
| :
|
|
MUSTTANGUY
¯
Member # 2251
|
posted
Aftermarket
--------------------
Tim (Musttanguy)
97 5.0 coupe
82 GT 427/T56/9"
Posts: 1690 | From: Lodi | Registered: Dec 2002
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
