|
Author
|
Topic: starter motor routing
|
1990COUPE
¯
Member # 8070
|
posted
 
 
forgot how to route the starter motor wires and where the two brackets supposed to be screwed in at. for a 1990 fox, thanks
--------------------
90' COUPE STROKED
93' HATCH (sold) RIP LEO
06' SILVERADO
Posts: 18 | From: EASTBAY | Registered: Dec 2007
| :
|
|
Captain Obvious
¯
Member # 7842
|
posted
quote:
Originally posted by 1990COUPE:
forgot how to route the starter motor wires and where the two brackets supposed to be screwed in at. for a 1990 fox, thanks
Mini torque starter or the older big 15lb piece of shit style.
--------------------
It's NOT illegal. It's just frowned upon, like masturbating on an airplane.
Posts: 1976 | Registered: Aug 2007
| :
|
|
1990COUPE
¯
Member # 8070
|
posted
the stock one...dont think its the 15 lb one..
--------------------
90' COUPE STROKED
93' HATCH (sold) RIP LEO
06' SILVERADO
Posts: 18 | From: EASTBAY | Registered: Dec 2007
| :
|
|
Captain Obvious
¯
Member # 7842
|
posted
I'm assuming a 90's mustang has the mini torque for stock (don't remember what year they switched to a mini torque)
The large cable goes on the same side as the batt positive, and the smaller jumper wire goes on the opposite side all by itself (no other wires should be on that terminal side from the factory except the starter jumper wire
--------------------
It's NOT illegal. It's just frowned upon, like masturbating on an airplane.
Posts: 1976 | Registered: Aug 2007
| :
|
|
1990COUPE
¯
Member # 8070
|
posted
yeah that i remember, i just forgot where to run those wires through?? under motor mounts and under oil pan?? where the two brackets that hold the wires are attached to??
--------------------
90' COUPE STROKED
93' HATCH (sold) RIP LEO
06' SILVERADO
Posts: 18 | From: EASTBAY | Registered: Dec 2007
| :
|
|
Captain Obvious
¯
Member # 7842
|
posted
quote:
Originally posted by 1990COUPE:
yeah that i remember, i just forgot where to run those wires through?? under motor mounts and under oil pan?? where the two brackets that hold the wires are attached to??
From the factory they (large and jumper wires) were routed with the O2 harness, they ran through those two small brackets on the sides of the block. Two wire from the starter, under the motor mount,one of the brackets mounts forward of the pass motor mount, both cables go under/behind the balancer, then through the driver side bracket (which mounts on the timing cover) then straight up to the solenoid.
[ June 13, 2011, 09:17 PM: Message edited by: 68stanger ]
--------------------
It's NOT illegal. It's just frowned upon, like masturbating on an airplane.
Posts: 1976 | Registered: Aug 2007
| :
|
|
1990COUPE
¯
Member # 8070
|
posted
right on bro...bout to go try it...thanks again
--------------------
90' COUPE STROKED
93' HATCH (sold) RIP LEO
06' SILVERADO
Posts: 18 | From: EASTBAY | Registered: Dec 2007
| :
|
|
Captain Obvious
¯
Member # 7842
|
posted
Heads up, I edited it for more clarity.
--------------------
It's NOT illegal. It's just frowned upon, like masturbating on an airplane.
Posts: 1976 | Registered: Aug 2007
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
